Danko Reproductions

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I bought a Danko front bumper once and it did fit ok with the body BUT the "ears" to mount the front parking lamps were not moulded right and I never was able to make them fit right. :mad: I sold it, bought a second one (because Danko refused to replace it) and guess what…it was as bad as the first one!! :rage: I got fed up, sold it again, took a loss and decided to go back to the original steel (one from on which I removed the rear reinforcement). (y)
This is why I'll never recommend Danko products to anyone ever! (n)

Claude.

I had the same problem with their front bumper. The mounting brackets were installed in such a way that only two bolts on each side would line up. Returning it was going to be a problem so I cut them off and moved them inboard about 4 inches. Also the turn lamps/bezels do not fit correctly causing them to stick out 3/8 of an inch. The good is that it doesn't weigh very much and the overall shape of the bumper was decent.
 
Last edited:
I bought a Danko front bumper once and it did fit ok with the body BUT the "ears" to mount the front parking lamps were not moulded right and I never was able to make them fit right. :mad: I sold it, bought a second one (because Danko refused to replace it) and guess what…it was as bad as the first one!! :rage: I got fed up, sold it again, took a loss and decided to go back to the original steel (one from on which I removed the rear reinforcement). (y)
This is why I'll never recommend Danko products to anyone ever! (n)

Claude.
Hey I would just like to know how long it took to get the bumper from day u purchased it, please
 
Back
Top