fullahotair
Member
- Joined
- Feb 26, 2002
- Messages
- 940
I get a bad vibration at around 55 and at 70 or so....the wheels are balanced, and I have new moser axles with new bearings. The original owner didn't have clips installed for the rear u-joint, so my suspicion is that caused a wallowing out of the bronze bushing in the tranny snout. If I grab ahold the driveshaft i can make it clunk in the tranny housing. I am guessing it is the bronze bushing??? (based on what i read, not from my own experience) Anyone have any thoughts on this? The weights are still on the driveshaft, but i suppose it could be out of balance...it also has new u joints...which is when i learned about the previous owner's oversite...
Thanks,
Nate
Thanks,
Nate
