Energy Susp Body bushing users plz help

[disco stu]

Has anybody had probs adjusting the front bumper high enough after installing these bushings? I am out of adjustment on the bumper mounts. It raised the body ~ 1/2". The bumper originally was adjusted to the top of the mounts slots. Now the bumper is too low and distorts the bumper fillers.

All the mounts are properly installed.

 

[disco stu]

ttt

 

[Greasemonkey]

This won't help you that much, but I didn't have any problems afterwards. The bushings at the radiator support weren't worn all that bad, so I gained very little height in that area.

 

[Red Regal T]

Try this..........With the bumper tightened in place, put a piece of 2 X 4 under the bumper where the front license plate would be, and take a floor jack and jack the car up off the ground at that position and let it sit for a while. May help get your bumper into position.