Guys,
I made a set of front frame braces to work with the Kirban transverse front brace that would clear my PTE SLIC and larger Hotchkis front bar. I have since swapped out the Hotchkis bar for a RideTech musclebar, and now I need to make different braces, LOL. I'm weight-conscious, so I bought some high-strength 1.25" OD aluminum round tubing with a .110" wall thickness, and custom bent the tubing to clear my sway bar and the PTE SLIC scoop. I pinched the tubing closed on each end, and drilled holes in the standard places to run from the rear frame saddle to the front horns and mate with the Kirban brace. Sorry, I took the parts off and didn't take pics of the parts in place. The bars are powder-coated semi-gloss black, but have some scrapes and dings, but no dents. I also marked each one as to DR/Pa side and which end is front. Sorry, I don't have any of the mounting bolts. These should work with any of the stock-location/stock-ish mount bracket bars out there, just not RideTech. $50 (+ 3% if using PayPal or gifting is fine) shipped to your door in the lower 48 States. First one to PM me they want them gets them.
Thanks for looking,
John A, Turbohh




I made a set of front frame braces to work with the Kirban transverse front brace that would clear my PTE SLIC and larger Hotchkis front bar. I have since swapped out the Hotchkis bar for a RideTech musclebar, and now I need to make different braces, LOL. I'm weight-conscious, so I bought some high-strength 1.25" OD aluminum round tubing with a .110" wall thickness, and custom bent the tubing to clear my sway bar and the PTE SLIC scoop. I pinched the tubing closed on each end, and drilled holes in the standard places to run from the rear frame saddle to the front horns and mate with the Kirban brace. Sorry, I took the parts off and didn't take pics of the parts in place. The bars are powder-coated semi-gloss black, but have some scrapes and dings, but no dents. I also marked each one as to DR/Pa side and which end is front. Sorry, I don't have any of the mounting bolts. These should work with any of the stock-location/stock-ish mount bracket bars out there, just not RideTech. $50 (+ 3% if using PayPal or gifting is fine) shipped to your door in the lower 48 States. First one to PM me they want them gets them.
Thanks for looking,
John A, Turbohh



