I bought this set-up from longtime member Karolko way back in 2011, and never got around to using it. Adrian told me the hose lengths are cut for a car with AC Delete, and I needed to keep my AC plus I wanted an aluminum pump, and made other changes so I have this set-up available. I did have the remote reservoir powder coated a titanium color. The set-up includes a used PS pump with a -10AN return and -6AN high-pressure fittings, the three lines - -10AN return and 2 -6AN pressure lines which have the steering gear box fittings with what looks like good O-rings, the remote reservoir with a screw-in cap, and a mounting bracket. I think Adrian has the reservoir hanging off the OEM fender bracket, and maybe if he sees this thread he can chime in. I'm not sure if these lines will clear a car with AC, but the -10AN line is approx. 10" long, the high-pressure line is about 13" long, and the low-pressure is about 11" long. The male -10AN fitting attached to the pump has been sealed with JB Weld material, and seems to be in good condition still. There were no cracks in it. I did wire brush the pump body and repaint it carefully by hand with KBS Coatings gloss black engine paint, so it's all nice and shiny now. I did paint a bit of the JB Weld as well, but you can see the remainder in the photos ... This is a real nice set-up for those of you that want to get rid of your leaky ugly OEM parts. Asking $225 shipped to your door in the lower 48 United States ... First one to PM me they want it gets it, and thanks for looking!!
John A, Turbohh
John A, Turbohh