Apr 8, 2010 #1 T TKMBUICK New Member Joined Feb 27, 2004 Messages 207 Which relay on the driver side fender is the fan relay there are two that look the same how do I no which one it is???
Which relay on the driver side fender is the fan relay there are two that look the same how do I no which one it is???
Apr 8, 2010 #2 T TurboBuRick Moderator Staff member Joined Feb 18, 2006 Messages 10,083 Both. One is for high speed and the other is low. One (low speed) is ecm controlled and the other (high speed) is triggereg by a sensor.
Both. One is for high speed and the other is low. One (low speed) is ecm controlled and the other (high speed) is triggereg by a sensor.
Apr 8, 2010 #3 T TKMBUICK New Member Joined Feb 27, 2004 Messages 207 Ok here's the deal my is't working and I bought a new relay for it now do I need two???
Apr 8, 2010 #4 T TurboBuRick Moderator Staff member Joined Feb 18, 2006 Messages 10,083 No phun intended but the real way is to test a few things to determine what the real problem is. Do you have the means to make a jumper wire? Just a small piece with the ends stripped.
No phun intended but the real way is to test a few things to determine what the real problem is. Do you have the means to make a jumper wire? Just a small piece with the ends stripped.
Apr 8, 2010 #5 B bmackinnon Active Member Joined Feb 24, 2005 Messages 2,092 Assuming you meant my FAN isn't working, you need to troubleshoot it to figure out why... likely a simple relay replacement won't fix it... here is a site that offers a pretty good troubleshooting guide: Vortex Turbo Buick Performance click 'troubleshooting', then 'fan circuitry' .... that should get you figured out...
Assuming you meant my FAN isn't working, you need to troubleshoot it to figure out why... likely a simple relay replacement won't fix it... here is a site that offers a pretty good troubleshooting guide: Vortex Turbo Buick Performance click 'troubleshooting', then 'fan circuitry' .... that should get you figured out...