Fast ,trans and more

[gczarny]

for sale Classic Fast with Buick adaptor harness and very fresh WBO2 sensor $800 , GM ECM $50 (chip cover missing ) , A1000 fuel pump with electronic controler and filter housing (2 cartriges included ) $400 , very fresh Behives roller springs and seats $100 , 2 sets of Comp Cams high rev 885 roller lifters $ 150 per set , TE-63-1 turbo with less then 500 mls on it $650 , race build 200R4 trans with less then 1000 mls of street driving build by Jimmy's Transmission ,Mundelein IL , $1600 no core needed ,GM power brake unit $150 , brand new set of front 2 inch drop Gbody spindles $130 ,set of rear shocks with over spring design $80 , stock radiator in very good shape $100 , set of 15 " Craiger wheels with front Dunlop tires or I can mount brand new BF's on it plus Nittos 555 on back rims ( tell me which you want ),OEM ignition madule and coil pack $100 ,TPS- tec inhancer $20 , brand new Gbody drive shaft loop $50 ,all parts in very good condition , shipping extra , prefer cashier's check / money order , paypal is possible but you pay 3 % more for their fees ,email me for any pics , more info ,shipping by UPS ,thanks

 

[joe_schindler]

I get a failure notice sending mail to:

gczarny@comcast.net

 

[gczarny]

I get a failure notice sending mail to:

gczarny@comcast.net

not sure how you got this email address , I am not using it for years , please email me all questions to evaczarny@sbcglobal.net ,thanks

 

[Eticket]

Interest in one set of lifters. Are they still good? any idea of mileage? Are they noisey or something?

 

[TurboTJT]

I'll take the TPS-tec enhancer. Pm me your payment info. Thx, -Tim

 

[gczarny]

Interest in one set of lifters. Are they still good? any idea of mileage? Are they noisey or something?

I got 2 sets ,they both been to the track once in two different motors , one set has about 500 mls total and the other has about 2000 mls total street driving and like I mentioned once at the track , looking close at them you can not tell the difference , none of them have any issues neither came from blown motor , just replaced with more forgiving ( preload wise ) morrel lifters .

 

[OneQuikSix]

I'm very interested in the TE-63-1. Do you have any pictures? What kind of shape is the turbo in (any play in the center section)?

 

[tom robison]

more info on the trans please.

 

[gczarny]

I'm very interested in the TE-63-1. Do you have any pictures? What kind of shape is the turbo in (any play in the center section)?

NO shaft play at all , like I stated here it's got about 500 mls on it , 4 inch inlet 3 inch outlet 0.85 A/R exhaust housing .

 

[gczarny]

more info on the trans please.

here is build

 

[OneQuikSix]

Sending PM on turbo.

 

[OneQuikSix]

Sent money via Paypal for turbo.

 

[84BuickGNYorkPA]

Is the tranny set up, for a lock up converter? Would this be a good street/strip tranny?

Chuck

 

[gczarny]

Is the tranny set up, for a lock up converter? Would this be a good street/strip tranny?

Chuck

right now is set up as lock up ,great all around trans .

 

[bison]

Ill take a set of 885's

 

[gczarny]

Ill take a set of 885's

sweet use evaczarny@hotmail.com for paypal payment if you want it that way and $20 will cover shipping /paypal fees in US ,so $170 at your door ,thanks

 

[bison]

sweet use evaczarny@hotmail.com for paypal payment if you want it that way and $20 will cover shipping /paypal fees in US ,so $170 at your door ,thanks

paypal sent

 

[V8killR4U]

Interested in coil pack and module. What does the coil OHM out at? Also how old is the module.

 

[slow85gn]

looking 4 a scanmaster

 

[BREAKIN IT]

I want the trans. Sent a pm