You can type here any text you want

Fastest TTA's of (2016)

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
I ran 26 psi on my old setup with a PT6776 for about 8 years with ARP Pro Series head bolts and stock Felpro graphite head gaskets...no problem. The stock rear held up for a while even with a trans brake but after several 16 psi launches off the trans brake and 1.48 60' I eventually blew about 6 teeth off the ring gear. The trans brake definitely did the damage.
 
Last edited:
OK kinda of a lack luster start. Went to a local track and it was not pretty.

New best 60' 1.84 on 255/50/16 Goodyear gsc's and had to lift because of a bad map conection. Went 8.4@80 on 15psi out to about 400' maybe next time we will get down into the 7's
 
My initial tuning hits from 2nd to 3rd are crazy! 19-20 psi boost.
The .85 housing is doing its job up top too. 3rd gear is warp F'n Speed!
May go to the dyno first.
 
Back
Top