Fitting for 6262bb Were to get them

[Bigjack7440]

I have gone to a 6262BB . I got it from Cal @ Hartline I can't get him on the phone anyway. It had a( looked to be)a #4mix to a #4 jic and it's a restrictive fitting . I have a #3 steel braided line from Gbody and the right fitting for the block . That same fitting from Gbody will work on the turbo but it's not a oil restrictor fitting . Were in the Hell do I find what I need? I built a Turbo T motor in three days , but it's taken me 2 weeks to change this turbo. PS don't ever sell your old turbo before you get all your fitting out of it lol. HELP

 

[Otto J]

Do not take the restictor fitting out of the turbo,If its the new style air cooled units this fitting locates the BB cartridge if i am not mistaken.
That fitting is pipe thread,you should have a hard time adapting an oil line fitting to it.

 

[Bigjack7440]

Well were can I get the right fitting or line . I want the right parts . If I need to buy a new line and fittings that's fine but were

 

[HighPSI]

Sorry, I have been away at Norwalk and visiting Buick friends. I'm not sure what you have coming out of the block, but would recommend using an adaptor and a -4 line to the oil restrictor in the turbo. If I remember correctly the factory oil hole in the block is 1/4 npt. If you are using the factory "T" then you will need to adapt a compression fitting to -4. My local Ace hardware has this fitting. I will be back in the office Tuesday.

 

[Bigjack7440]

Cal I had a #4 line but the fitting in the block is the factory t my stock metal bent line came out of it . I got a line from Gbody with the fitting goes in the block and the turbo but I need another one like that with oil restriction . Or a line kit with both fittings. I have been messing with this turbo for a week clocking it and the turbo sheild brk. Are in the wrong place . I realy need. Phone call from you just 5 min of your time please. 843-617-5606

 

[Bigjack7440]

I got It .I took a #4 line that was #4 90deg.on one end and #3 on the other off my fogger kit . That was easy.

 

[HighPSI]

Well it was a little longer than a 5 minute call Looks like we have it figured out. Call me again if you get "stuck"