Fontana Report!

[turbolou]

Congratulations to Bob Lilligards off the trailer pass of 10.73 @ 123.65. He has no roll bar & made one pass only before he gets kicked out. 109 ,block ,steel heads,stock computer, head gaskets, 212 hyd. cam. 25# boost.Thought to post this before Harold had a chance to claim credit as he tried in the past for my hard work on this car. This was another deal where he went around my back.Tried to dazzle Bob & interfere with my customer & take all the credit.By the way the heads were ported by BPE the same people that he was criticizing. He still hasn't made a pass with his junk yet & if he doesn't run deep into the 11's with his recipe I will laugh my ass off.

 

[graza002]

Congratulations to Bob Lilligards off the trailer pass of 10.73 @ 123.65. He has no roll bar & made one pass only before he gets kicked out. 109 ,block ,steel heads,stock computer, head gaskets, 212 hyd. cam. 25# boost.Thought to post this before Harold had a chance to claim credit as he tried in the past for my hard work on this car. This was another deal where he went around my back.Tried to dazzle Bob & interfere with my customer & take all the credit.By the way the heads were ported by BPE the same people that he was criticizing. He still hasn't made a pass with his junk yet & if he doesn't run deep into the 11's with his recipe I will laugh my ass off.

Congrats...sounds like a great run. 10.73..wish I could do that...I am at about a 16 sec 1/4 with ledzeppac (Phill) right now. LOL

 

[ledzeppac]

Congrats...sounds like a great run. 10.73..wish I could do that...I am at about a 16 sec 1/4 with ledzeppac (Phill) right now. LOL

Hey! I might be able to sqweek out a 16.5 because I'm putting new shocks on and fixed the dash lights.

 

[Chevota]

Congratulations to Bob Lilligards off the trailer pass of 10.73 @ 123.65. He has no roll bar & made one pass only before he gets kicked out. 109 ,block ,steel heads,stock computer, head gaskets, 212 hyd. cam. 25# boost.Thought to post this before Harold had a chance to claim credit as he tried in the past for my hard work on this car. This was another deal where he went around my back.Tried to dazzle Bob & interfere with my customer & take all the credit.By the way the heads were ported by BPE the same people that he was criticizing. He still hasn't made a pass with his junk yet & if he doesn't run deep into the 11's with his recipe I will laugh my ass off.

prepare to laugh you ass off....:tongue:

 

[cruzn57]

well the MOUTH ran..........

1st run, 12.03@ 114 1.94- 60 ft
2nd run 11.73@114 1.62 60 ft

all on borrowed stuff...........

tires,
gas
helmet
luck

acccording to the HP calculator, it comes out to about 400 HP

both runs were at 114 mph, kinda tells me thats all it has, no matter what the driver says!!!!

 

[cruzn57]

Sorry, forgot the good stuff!!

Ray ran 11.22@ 117 and drove home!!!!!!!!!!! FANTASTIC!!
Nordy ran 10.32@130 impressive!!!!!!!!!
sorry I didn't catch the names, monte carlo w/ buick turbo and buyer of Lou's Turbo Regal, very nice!! both cars!!

I really enjoyed it when Brent advised Kevin about tires, etc,
advice from a more experienced driver/ tuner is helpful!!

Great to see all of you again, thanks for the fun

cruzn57

 

[Underboost]

Guess the first words out of wikeds mouth after the 11:70 pass
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
My foot wasn't all the way down!

I had to walk away I was laughing so hard to myself. He has got to be the world biggest bull $hiter and actually thinks people believe him. LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 11.70 LOL I'm glad I didn't race him it would have been the biggest waist of my time. 10"s hahahahahahaha sure Wiked whatever you say!

 

[it's just a six]

I saw a GN run 10.40's- 10.70's?? @ 130 MPH at Fontana today also, not sure who's it was?
Hank

 

[nordy racer]

I saw a GN run 10.40's- 10.70's?? @ 130 MPH at Fontana today also, not sure who's it was?
Hank

bob's was the 10.70's and my first run was a 10.41 130mph, then backed it up with the 10.32 130mph..

 

[Silver 'T' Top]

So.... where's he at??

 

[my1stgn]

This is the funny part. A lot of people buy tons of money and parts for their cars but never take them to the track (not mentioning names, just in general) and they throw out numbers like "it should run 11's" or "people with similar/less mods run 10's".... but you dont know what the car runs unless you actually run it at the track, not on the street. Car may be capable of 11's but you may only drive it into the 12's...... but hey, Im not a street racer so I wouldnt know!

 

[Silver 'T' Top]

Yep, I know several people like that also. Hopefully get mine back out to the track real soon and let 'er rip... 11.72 in sig was on beat up ET streets and getting out of it at the 1000' mark afetr I heard that all too familiar "pop" sound, that seems to be notorious in these cars.

 

[nordy racer]

step-dad Bob getting set to run is "John Force" time..

Bob's time.

Kevin complaining about the cold and wishing for his 11 sec slip. must have been the helmet or the tires that pushed the car to 11's.

The car show queen after beening teched in..

Step- dad Lou's old car and the Monte GN (nice chatting with you guys )

Ray playing back all his runs in his head, wishing he didn't F up the trans brake launchs (time 2).. Side note Ray: your car runs GREAT and still no DIPS.
[

GREAT TIMES AGAIN.. It was a blast chatting with everyone and getting tips on TRYING :redface: to get the car to run faster..

 

[wiked87gn]

1st run, 12.03@ 114 1.94- 60 ft
2nd run 11.73@114 1.62 60 ft

all on borrowed stuff...........

tires,
gas
helmet
luck

acccording to the HP calculator, it comes out to about 400 HP

both runs were at 114 mph, kinda tells me thats all it has, no matter what the driver says!!!!

And only 23.5 pounds on boost and yes there is still plenty left in it .

 

[wiked87gn]

Guess the first words out of wikeds mouth after the 11:70 pass
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
My foot wasn't all the way down!

I had to walk away I was laughing so hard to myself. He has got to be the world biggest bull $hiter and actually thinks people believe him. LOL!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 11.70 LOL I'm glad I didn't race him it would have been the biggest waist of my time. 10"s hahahahahahaha sure Wiked whatever you say!

damn right my foot wasn't all the way down I am not A loose nut like you trying to push the gas pedal through the firewall sure it's 10' capable but I don't want to leave the crank and trannie parts on the track floor like you did, I am smarter than that and not a lobster like you who has Sh** for brains.

PS: wasting time is standing in line for 3 hours today just to get 1 lousy second pass, if thats what your into then have at it. and be happy I didn't race you because you would off turned up the BOOST to like 40 pounds just to beat me and in the process blowing it up much earlier, BTW thanks for the Tip about the floor mat but it was sitting in my truck way before you even told me about it.

 

[wiked87gn]

Congratulations to Bob Lilligards off the trailer pass of 10.73 @ 123.65. He has no roll bar & made one pass only before he gets kicked out. 109 ,block ,steel heads,stock computer, head gaskets, 212 hyd. cam. 25# boost.Thought to post this before Harold had a chance to claim credit as he tried in the past for my hard work on this car. This was another deal where he went around my back.Tried to dazzle Bob & interfere with my customer & take all the credit.By the way the heads were ported by BPE the same people that he was criticizing. He still hasn't made a pass with his junk yet & if he doesn't run deep into the 11's with his recipe I will laugh my ass off.

If i clearly remember and I can quote Bob on this, he asked me to work on this car and change the 5 fu** up you made on his car here let me list them for yah.

1- grannatelli maf that you charged him $400.00 for it
2- 2.3 dinosaur Translater that didn't even list the Grannatelli maf on the choices to pick which MAF to make the Translater work with it.
3- 50 pounds injectors to accommodate a motor capable of over 600fwhp.
4- wrong Chip, of course it was your in it trying to make it work with the Dinosaur Translater you installed in it.
5- a week later the hot wire kit you installed to the new fuel pump was pinched by one of the bolts you used to install the cat back exhaust system causing a short and almost a fire, once again i found it and fixed it, good thing the short didn't happen during one of his runs or he would off granated that motor big time.

You want me to keep going, I will if i have too, Bob spend $900.00 plus on the parts we bought including 72 pound injectors, updated 6.22 translater, extender extreme chip, had the ECU modified to accommodate the bigger injectors, got a 3.5 inch LS1 Maf all from fullthrottle, and we also changed the crappie granatelli you installed., the previous week he could only get a 7.1 at irwindale and a 2.2 sixty with your great combo you had installed in it, the car keep stalling at idle every time you reved it because it was running way to rich you were getting angry because you couldn't figure out what was wrong with it, I took one Look and knew what needed to be changed but didn't want to say anything because got forbid making you look bad in front of people you would kill me or die of embarrassment, next week he went out and Ran a 6.86 with a 1.45 sixty foot at 101mph, go figure I must have been doing everything wrong when I worked on it making the changes I did, you got pissed off because he ask me behind your back to work on his car period.. even and old dog like you can learn new tricks, please be grateful and I was able to help the guy when he ask for it and in the process fixed up all the little Fu** ups you made.. the rest is history the guy knows how to drive his car and he makes it happen not you and not me, end of story. :biggrin:

Let me also list a few things you have copied off my car and implement on all your customers rides

1- HRparts suspension, which after seeing it in my car you installed it on Bobs car, Brents car and Lemans car.
2- alky injection, starting with SMC then Alky control you didnt even know who made them and they were available to public until you saw it my car.
3-RJC Mega cooler after brent saw it in my car went out and bought one to have you install it
4- turbo tweak chip
5- LS1 mafs

The list goes on and on I just don't want to continue arguing with someone you who can't accept critizism or willing to accept he makes mistakes, Lou, we are only human learn to accept and you will be in your way to become a better person I have learned a great deal from you over the past few years and I thank you for it, now i can say i have enough knowlegde thanks to you and this board to be able to work on my own car and not depend on you to do everything for me except the dirty work when i dont want to get my hands dirty..

wiked

 

[wiked87gn]

here Lou my time slip for you.

even if its only an 11.7 with a 1.7 sixty foot and only 23.5psi yes you heard right only 23.5psi it is still an 11sec pass, pleaseeee take a good look, if you look close you can almost make out the numbers. you too Brent.

 

[marred4life]

only 11 with all those mods ON race gas, come on man that aint right, 23.5lbs you should be running low 10s high 9s with a good tune. it might just be the driver but i could be wrong

 

[cruzn57]

and the bull$hit flys!!!!!!!!!!!

you related to Al Gore? you invent the internet too ???

taking credit for any/ and everything! (BS)
sway bar
alky
mega cooler
turbo tweak chip
LS-1 MAF
are you kidding me???

please don't embarrass the western section!!!
go back to where you came from, you are a joke, everyone thinks so,
don't you get it? what is wrong with you?

we all argeed to ignore you, but this is pathetic,

the entire buick community is laughing at you and your stories,
including the entire east coast!!!!!
and you still don't get it do you?

what a joke. and it spelled Kevin/ Harold........

 

[Chevota]

I'm still amazed he pulled his finger out of his a$$ long enough to take that photo. 11.7? What a waste of good parts....