Frame notch plates

[YAKO]

Does any one know of a company that has precut notch plates so i can run bigger tires in the rear of my GN .I found a stock car company that had plates that fit the bill perfectly last year but i can not locate them again,if any one knows of a contact ,THANKS

 

[captflash]

subscribed

 

[turbofabricator]

Just use the piece you cut out. I just cut along the frame splice and the grind it down and hammer the removed secton back in place. Add a cross member just below the original muffler mounting brackets to support the spring purches. Weld them all together and add splice plates fromnt and rear and you're done.

 

[David Husek]

PM sent

 

[J-B Racing]

Just use the piece you cut out. I just cut along the frame splice and the grind it down and hammer the removed secton back in place. Add a cross member just below the original muffler mounting brackets to support the spring purches. Weld them all together and add splice plates fromnt and rear and you're done.

That's a thought. But I also remember of that company he is talking about. They had complete kits for like $150. It was dirt cheap with thickness options. I will keep looking.

Joe

 

[toofastforyou]

Here...

Claude. :wink:

 

[big reazon]

Ehh takeout what you cut out trace it to whatever thickness metal you decide to use and weld it up and cross brace and done I did the whole job in 2 days at 6 hour days.

 

[YAKO]

Anyone looking for a set like in claudes picture ,contact david husek ,he has the same kit for sale

 

[movinfast]

Anybody have pics of them installed? Any notched pics

 

[forcefed3.8's]

You still have to trim the kits.