Ok here is the story. I've attached the ECM file if anyone wants to look at it. Whenever I run T-Link on my GN and go for a ride...the data will make sense in most of the frames but every once and a while you get a frame that will show BOGUS info. Examples include (this will be from one frame to the NEXT frame)
Prom ID : 4D4D, 4D4D, 9E9E, 4D4D (later on down the road something else will show up like F4F2 or something, like i am changing chips while driving!
Coolant Temp : 162, 164, 250, 163, 164 (then again later in the frames a -20 will show up or something)
Battery volts : 13.9, 13.8, 14.1, 20.5, 13.8, 13.9, 6.2??? wtf
Engine speed : 6400 rpm??? what the?
ESC Counts : 7, 7, 7, 7, 7, 14, then goes back to 7? huh?
ECM Mode : Normal, Normal, Normal, ALDL, Normal???
MAT - 130 degrees? um no!
All that "odd weird info" will all show up in ONE frame at the same time...like coolant temp 250, battery volts 6.2, ESC count 14, ALDL mode, PROM id 9E9E (not my chip), etc. but then everything goes back to normal again...this happens every 20 frames or so...it's like my ECM has a short in it or something?!
here's a goody...out of 249 frames recorded during one run...ONE single frame reported a malfunction code of 55 ECM A/D converter failure...WTF?! look at frame 87 and also check out frame 9
i just wonder if my ECM is going bad? i checked my cables and stuff and they are secure...what is going on here?
Prom ID : 4D4D, 4D4D, 9E9E, 4D4D (later on down the road something else will show up like F4F2 or something, like i am changing chips while driving!
Coolant Temp : 162, 164, 250, 163, 164 (then again later in the frames a -20 will show up or something)
Battery volts : 13.9, 13.8, 14.1, 20.5, 13.8, 13.9, 6.2??? wtf
Engine speed : 6400 rpm??? what the?
ESC Counts : 7, 7, 7, 7, 7, 14, then goes back to 7? huh?
ECM Mode : Normal, Normal, Normal, ALDL, Normal???
MAT - 130 degrees? um no!
All that "odd weird info" will all show up in ONE frame at the same time...like coolant temp 250, battery volts 6.2, ESC count 14, ALDL mode, PROM id 9E9E (not my chip), etc. but then everything goes back to normal again...this happens every 20 frames or so...it's like my ECM has a short in it or something?!
here's a goody...out of 249 frames recorded during one run...ONE single frame reported a malfunction code of 55 ECM A/D converter failure...WTF?! look at frame 87 and also check out frame 9
i just wonder if my ECM is going bad? i checked my cables and stuff and they are secure...what is going on here?