Gn-1's 14bolt

[lazaris]

Bought last year 32 passes. Full race port, upgraded to high temp Inconel exh valves. They have the high dollar TD roller rockers 1.65 ratio. Crower dual springs with titanium retainers. Set up for hyd roller cam. Will supply fresh valve job before sale. Have over $3300 into them before freshen up.
$2600

 

[lazaris]

Ttt

 

[49-blues]

Need anything in trade? New wheel sets? Stage2 heads?

 

[lazaris]

Need anything in trade? New wheel sets? Stage2 heads?

Sorry, I dont.

 

[Quicksilver]

Can you send pics. to jmacpherson@roadrunner.com ?
Are the heads milled smooth for Cometic gaskets or O-ringed?
Will the valve sizes allow them to be used on a 3.820 bore?

Thanks, John

 

[lazaris]

John,
Yes they are for the cometics as thats what I used. They are not oringed. The valve size is 1.90 1.60 and will work on 3.8 bore size. I'll try to get some pics by Monday.

 

[Quicksilver]

Thanks, I'm very interested and will make a decision after reviewing any pics you can send.
Do you know what the max. lift that the spring/keepers will allow?
Can you me estimate shipping to NY, 14057 (near Buffalo)
How do you prefer payment, Money order, paypal or ?

 

[lazaris]

They should allow .600 lift easy. Im in NY as well. Shouldnt be too bad. Id have to weigh them to get a good estimate. I'll get that done Monday as well. MO would be fine.

 

[lazaris]

Pictures sent.

 

[lazaris]

I will add the Comp Magnum Hyd Roller Lifters and a set of Manley Pro Series chromoly pushrods matched to this set up for an additional $400. The valve job is complete with all the valves being back cut and seats blended to the bowls. The push rod holes have now been clearanced to run a 3/8" push rod. The spring seats have also been enlarged to run a 1.550 spring as well.