You can type here any text you want

GN1 Performance 3in Pit Bull Mufflers

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

turbo6mike

Mike Ruminski
Joined
Sep 6, 2004
Messages
1,155
I have 2 GN1 Performance 3 inch Pitbull Mufflers for sale. They are brand new in the box just open to inspect them after being shipped.
$285 shipped to lower 48
Thanks, Mike
IMG_0847.jpg
IMG_0848.jpg
 
Last edited:
Surprised they are still here?

Although the new Pitbull perforated core mufflers are very nice and work well with that style of exhaust system, the original ATR Pitbull power slot design are the most desirable and sell in minutes.
 
Although the new Pitbull perforated core mufflers are very nice and work well with that style of exhaust system, the original ATR Pitbull power slot design are the most desirable and sell in minutes.
 

Attachments

  • ATR Pit Bulls 2.jpeg
    ATR Pit Bulls 2.jpeg
    26.9 KB · Views: 177
  • ATR Pit Bull Mufflers 008.jpeg
    ATR Pit Bull Mufflers 008.jpeg
    62.1 KB · Views: 174
If you still have these on Thursday, I will take them. I’m on a family vacation in Italy right now, but will be back. If they are still here I’m going to snag em up.
 
The single muffler crossflow from ATR with dual tail pipes also has the slits on the inside. I bought it way back in the mid 90's. I never knew there were two designs until about a month ago when talking to a buddy about his. It has about 120,000 miles on it and the sticker is still there. (not for sale)

20240415_152901.jpg
 
Although the new Pitbull perforated core mufflers are very nice and work well with that style of exhaust system, the original ATR Pitbull power slot design are the most desirable and sell in minutes.
I found a complete atr system and drove home with it on the passenger seat 😂
 
I found a complete atr system and drove home with it on the passenger seat 😂

Lucky you! That’s Awesome!!
Send me some photos of the inside of the mufflers.
If you can provide dimensions of the slots and the spaces between the slots that would be swell.

I made a 3.5” Magnaflow style factory sized muffler for our 2010 Escalade ESV.
I wanted a straight through muffler that was quiet. I contemplated power slots but went with 1/4” holes. It turned out better than anticipated, very deep toned and about the factory sound level.

I think it would be fun to make some ATR power slot tribute mufflers and see how they turn out.
 
Back
Top