HALF DUZZIN
New Member
- Joined
- Feb 27, 2014
- Messages
- 20
Hello Buick Club,
I have a few parts looking for a new home.
Brand New Set of T&D - T/A Performance 1.6 Shaft Mount Roller Rockers for Iron Heads (Never Been Installed)$580.00 or Best Offer
COMBO DEAL:
Lower Intake w/55lb Injectors and upper plenum along with port matched heads.
Heads were just pressure and vacuumed checked by Arlington Machine Shop. Heads are complete with Beehive Springs, new seals and retainers etc. (6sec. combo) My car has been in the 6's with this combo at 21lbs of boost running a 206/206 Flat Tappet set-up. Excellent port job on the heads. HEADS HAVE NOT BE INSTALLED SINCE BEING PREPPED FOR THIS SEASON "Make Reasonable Offer"
I will also throw in the adjustable chip with the package combo, so no need to worry about the chip (stock ECM Modified for low Imp. injectors)
Bowling Green Custom intake w/Dog House and Billet Fuel Rail. $500 obo
Feel Free to call/text me @ 682 201 0178 or 214 251 0846 or email
kevin.high@usmd.com
No known issues with parts
Have receipts for rockers and Machine Shop if desired.
I have a few parts looking for a new home.
Brand New Set of T&D - T/A Performance 1.6 Shaft Mount Roller Rockers for Iron Heads (Never Been Installed)$580.00 or Best Offer
COMBO DEAL:
Lower Intake w/55lb Injectors and upper plenum along with port matched heads.
Heads were just pressure and vacuumed checked by Arlington Machine Shop. Heads are complete with Beehive Springs, new seals and retainers etc. (6sec. combo) My car has been in the 6's with this combo at 21lbs of boost running a 206/206 Flat Tappet set-up. Excellent port job on the heads. HEADS HAVE NOT BE INSTALLED SINCE BEING PREPPED FOR THIS SEASON "Make Reasonable Offer"
I will also throw in the adjustable chip with the package combo, so no need to worry about the chip (stock ECM Modified for low Imp. injectors)
Bowling Green Custom intake w/Dog House and Billet Fuel Rail. $500 obo
Feel Free to call/text me @ 682 201 0178 or 214 251 0846 or email
kevin.high@usmd.com
No known issues with parts
Have receipts for rockers and Machine Shop if desired.