Harland Sharp 1.65 rockers, injectors, new cam sensors, 62mm tb, turbos, balancers

[bison]

Harland Sharp 1.65 rockers for stock heads $375 shipped
42 lb/hr injectors $55 shipped. mileage unknown
Garrett stage 2 turbo with rebuild and re-balance. Ex housing sealing surfaces ground for a good seal. $225 shipped
Stock turbo with rebuild including new bearing housing and ex housing sealing surfaces ground for a good seal. $275 shipped
62 mm throttle body $75 shipped
new cam sensor assemblies $125 shipped
stock 84-89 balancers $65ea shipped except the clean one in the lower left is $75 shipped.
vacuum block with new gasket and hardware $25 shipped
Add 3.5% for paypal
]

 

[bison]

more pics
aaaView attachment 149457

 

[bison]

 

[bison]

 

["Reaper"]

Is the TB stock and ported to 62?

 

["Reaper"]

I also i have a buddy that wants one of the cam sensor

 

[bison]

Is the TB stock and ported to 62?

Its bored to 62mm and has had the blade replaced to accommodate the larger bore. The shaft seals feel snug on the shaft too.

 

[bison]

I also i have a buddy that wants one of the cam sensor

ok. I accept MO's also. PM me for info

 

["Reaper"]

u have a pm

 

[David Husek]

Interested in doing a trade? I am interested in the cam sensors. Let me know....

 

[bison]

One cam sensor AND THE 62mm tb sold.

 

[bison]

Interested in doing a trade? I am interested in the cam sensors. Let me know....

Looking for $ more than anything but lmk what you have via pm.

 

[bison]

ttth

 

[G-Force]

I Will take the vacuum block if still available.

 

[bison]

Vacuum block sold

 

[markboss]

1st in line for turbo.
pm sent

 

[boostmaster]

Payment sent

 

[bison]

2 cam sensors sold

 

[bison]

Stage 2 turbo sold.

I have the following left of this stuff:
rockers, balancers, injectors, one cam sensor, and the stock turbo

 

[bison]

Ttt