Turbo PeppeR
New Member
- Joined
- Mar 7, 2002
- Messages
- 53
this is the situation..My 87 gn has been sitting since july 2000 with a bad te-44.I have bought a new te-44, oil pressure gauge,water temp and most importantly a scan tool.The rest of my combo is atr chip (1997 issue) 36lb injecters,14" knn,adj regulator,307 pump w/ hotwire,adj. wastegate,3" atr dn pipe, 3" single shot with flowmaster and rebuilt trans(stock).I cleaned the intercooler and have taken out radiator to have it flush(turbo pieces in oil cooler?I had a chip in 1 of the intake blades on turbo from woobly shaft).what else should i do before i fire it up?What chip should i get for street use 91octane.strip chip 104octane, Muffler,how bad are the flowmasters?307,safe for combo? Thanks for suggestions...
