help

[USMC_Turbo6]

Putting in some con sound 2 door panel and some 5 1/4 do i need to cut the door for them to fit or what should I do.

 

[TRICKSIXPA]

Well If you bought the CSII door panels yes your gonna have to cut. There is no real template to use except looking at another door that came factory with it.

 

[USMC_Turbo6]

Any one have any pic of a door that came with the CSII in them. Or anything that will help me out?

 

[garyk1970]

You got the baskets too right? The mounting holes in baskets will line up with dimples in the door.this will show you exactally where to cut holes for speaker magnet clearance..

 

[v8eetrr]

Door speakers are going to be a PITA if you are bolting them into the door itself. The "topography" of the door where the factory put 5 1/4"s is all screwy - you cannot just mount a speaker to it. Those little baskets are the key if you want a factory style installation - they are made to bolt to the door sheetmetal & conform to the surface. Otherwise, get creative!! Mount into the door panel & cut the door for speaker magnet relief.

HTH

Linc

 

[Bweavy]

You got the baskets too right? The mounting holes in baskets will line up with dimples in the door.this will show you exactally where to cut holes for speaker magnet clearance..

Exactly.

 

[USMC_Turbo6]

I dont have them, so who has them and how much for them