cal_gecko
New Member
- Joined
- Sep 30, 2004
- Messages
- 9
Hey Bruce, it's Mark .. I brought my 904 Tranny to you a couple months ago to have you install new bands, clutches, valvebody, gearset, and seals and stuff..
I'm finally getting to the point where I'll be firing it up soon, and I'm using a B&M Quicksilver shifter. In the instructions for the shifter, it states that the transmission is in 1st gear when the lever on the trans is all the way towards the back of the car. This almost seems backwards from the way the shifter works, because when I ratchet the shifter from P-R-N-1-2-3 (Griner Reverse Manual VB), it moves the lever from the back towards the front.
Thanks!
I'm finally getting to the point where I'll be firing it up soon, and I'm using a B&M Quicksilver shifter. In the instructions for the shifter, it states that the transmission is in 1st gear when the lever on the trans is all the way towards the back of the car. This almost seems backwards from the way the shifter works, because when I ratchet the shifter from P-R-N-1-2-3 (Griner Reverse Manual VB), it moves the lever from the back towards the front.
Thanks!