Nasty Wendy
Perverted Lurker
- Joined
- May 24, 2001
- Messages
- 2,203
OK so my fuel supply line is leaking through pin holes in the section of line that follows the frame rail. The leaky area starts at about the driver's door hinges and leaks for about 1 foot. I would like to change out this section of fuel line. I've taken off the fuel filter and disconnected it in the engine compartment where it comes out of the frame. I've looked and found a bolted in clip that holds in place along the frame. With this clip off and the line disconnected at the fuel filter and up front that section of fuel line still seems really dam snug in there. Is there a clip hiding that I still have to remove? Any help in getting this section of line out will be appreciated. I do want it out to not have a dead line there but I also want it so that I can make sure I get the proper ends on the replacement I bend. It also looks like it would be a freaking PIA to change a fuel filter with that line still there unused. So it is disconnected on both ends and I've removed one clip holding it to the frame. What else is needed to get it out? Thanks.