high pressure hose clamp

[t3intercooled]

I was curious, I am looking for a t bolt clamps to fit on the spout of the turbo that leads to the intercooler. I went to napa and o'reilly auto parts and the lowest they go is 2 and a half inch, however I need 1 to fit a 2 inch. now napa did have a clamp called a constant torque hose clamp. I was curious if anyone has use that or if they know if it will hold to high pressure. the part number 4 them at napa is 705-1507. can anyone confirm that for me, or if anyone has a part number for a clamp that will hold high pressure at a local auto parts store. Thanks a lot in advance

 

[~JM~]

I ordered a set of hose clamps from Kirbans & heavy duty couplings when my turbine discharge hose kept blowing off. Fixed the problem but those new hoses/couplings are just enough thicker that they can be a real PITA to install.

http://www.kirbanperformance.com/product/120/Intercooler+Hoses+HEAVY-DUTY+CLAMPS+(6)+SET+#1563.html

~JM~

 

[CGASTON]

Well I would try racepartsolutions.com..... This is where GBody gets the silicon hose and t-Bars..... Plus they are cheaper there than GBody. I have another site that sells them at home. U will try n post it later.

Sent from my iPhone using Forum Runner

 

[Red C5]

How many do you need? I think we have some in stock. Are you blowing off the hose?

Peter

 

[novaderrik]

look at a local diesel truck repair shop..

 

[87gninpa]

I got all of my couplers/clamps from racepartssolutions.com a few years ago and havent had a problem since. Nice stuff for a good price.

 

[Phatman]

http://www.racepartsolutions.com/index.asp

I agree great service...

 

[TRICKSIXPA]

I use Constant torque clamps and I think they are way superior than those T bar clamps. I got Stainless one at a local truck parts store.
There are numbers on mine ie. 350= 3.5 inch which I think I used on my 3" pipes. 250=2.5 used on my innercooler to turbo hose. they are between $4-$6. each

 

[salvageV6]

Constant torque clamps work great most have belleville washers on them.

They hold.

McMaster Carr sells just about every type and size of clamp out there and ships quick with credit card ordering no minimum.

I'd also trust a NAPA constant torque clamp.