HRPartsNstuff motor mount install

[oehm]

I just got around to installing my Poly driver side motor mount today. The piece was excellent quality, and fit perfectly. It only took about 45 minutes to install it too. I have not noticed any vibration, and the engine does not move back and forth like it used to under throttle.

If you dont have one, I would suggest getting one

 

[Two Lane]

AGREE 231%

Aren't they great!

Glad to see all those crude & tacky "torque-strap" bandaids get tossed out!

Paul makes great products, for sure!

 

[tim87tr]

Just got my ds poly on yesterday also, and noticed a nice improvement. I needed some help to prevent the dp from hitting the frame and A-arm, and the part did help. Guess I have one of those "tacky" torque straps for sale now Also not sure if I will install the passenger mount

 

[oehm]

I have heard that the passenger side mount is not necessary if you have the poly drivers side one.

 

[GN SBS]

Originally posted by oehm
I have heard that the passenger side mount is not necessary if you have the poly drivers side one.

I believe Paul recommends both once you're dipping into the deep 11s. Spoke to him about this recently.

 

[tim87tr]

Originally posted by GN SBS
I believe Paul recommends both once you're dipping into the deep 11s. Spoke to him about this recently.

I remembered why I bought both (6 months ago). With the new design, the motor can be rotated slightly to help with my dp to frame and A-arm clearance. The frame to motor mount bolt holes are slightly slotted to help in this method. I don't have to worry about low 11's yet Tim