Hyd. Roller Cam and Lifters

[Jeff Rand]

New hyd. roller Comp cam purchased from Ken Duttweiler.
Specs. Lift Intake - .511 Exhaust - .519
Duration Intake - 218 Ehaust - 224
Lobe separation 116

Comp hyd. lifters have about 1000 miles on them
Also adjustable cam stop
$480
Thanks,
Jeff
jrandsts@yahoo.com

 

[cruzn57]

Hi Jeff

would this be to much for a nasty street car?
nasty = 4.1, big heads, t45a, 75lb inj, 3200 stall, 3.73 gears,
I'm running a 214 roller in other car, and love it!
thanks
Lee

 

[lazaris]

I dont think so at all. Especially with a 4.1 and a 116 lobe sep angle.

 

[Jeff Rand]

would this be to much for a nasty street car?
nasty = 4.1, big heads, t45a, 75lb inj, 3200 stall, 3.73 gears,
I'm running a 214 roller in other car, and love it!
thanks
Lee

Lee,
When I bought the cam from Kenny I asked the same question (I was going to use it in a stock block). He told me that he has used these cams on street cars and it worked well. I decided not to build the stock block and focus on the TA block that I run and that is the reason for the sale.
Jeff

 

[psiedv6]

would this be to much for a nasty street car?
nasty = 4.1, big heads, t45a, 75lb inj, 3200 stall, 3.73 gears,
I'm running a 214 roller in other car, and love it!
thanks
Lee

Lee, did you want to go faster :biggrin:

 

[cruzn57]

Faster??

uh huh !! yup ,yup
one of them funny ideas I have ......

But, Jeff you say this won't work in a TA block?

uh oh.....
hope I'm not letting the cat out of the bag, :biggrin:


let me think about this.........

 

[Jeff Rand]

uh huh !! yup ,yup
one of them funny ideas I have ......

But, Jeff you say this won't work in a TA block?

uh oh.....
hope I'm not letting the cat out of the bag, :biggrin:


let me think about this.........

This cam will work on a TA block but I am happy with the solid roller cam that I am currently using.
Jeff

 

[Jeff Rand]

Price reduced to $450 for the cam, adjustable cam stop, and lifters.
Thanks,
Jeff

 

[49-blues]

Would you accept any trades?

 

[Jeff Rand]

Would you accept any trades?

I am trying to do some upgrades (going to a distributor) to my existing setup, so I need the money. At this point I am taking a loss on the cam and lifters.
Jeff

 

[chazmat2316]

New hyd. roller Comp cam purchased from Ken Duttweiler.
Specs. Lift Intake - .511 Exhaust - .519
Duration Intake - 218 Ehaust - 224
Lobe separation 116

Comp hyd. lifters have about 1000 miles on them
Also adjustable cam stop
$480
Thanks,
Jeff
jrandsts@yahoo.com

Is this lift with 1.5 rockers? Does cam or lifters show any wear? do you have the cam card? How much shipped to New york, very interested!

 

[Jeff Rand]

Is this lift with 1.5 rockers? Does cam or lifters show any wear? do you have the cam card? How much shipped to New york, very interested!

The lift is given using 1.55 rockers. The Comp cam and cam stop are new and the Comp lifters have about 1000 miles on them. They are in excellent condition. The cam is still wraped in the original plastic and it comes with the cam card. I would estimate price to ship would be $20. If it is more I will pay for it and if it is less I will refund the difference.
Jeff

 

[Jeff Strube]

Is this a Steel Billet RollerCam with the Keyed Removable Gear. Can you Post a Picture of It

 

[chazmat2316]

I'll take it! Let me know about payment!

 

[Jeff Rand]

I'll take it! Let me know about payment!

We can arrange everthing through e-mail.
Jeff
jrandsts@yahoo.com

 

[chazmat2316]

sounds good will email Charlie

 

[Jeff Strube]

I was interested in it. I just wanted to no if it was Billet

 

[chazmat2316]

Is this an off the self grind or one of Ken D's spec? 116 lobe center should have a good idle

 

[chazmat2316]

Jeff I emailed you about contact info. Charlie

 

[Jeff Rand]

Jeff I emailed you about contact info. Charlie

Charlie,
I never got your e-mail.
Jeff
jrandsts@yahoo.com