Hydroboost Master Cylinder - Options

[Jerryl]

Thought there was a thread with some details for an aluminum master cylinder option for the hydroboost.
Unable to locate the info and appreciate some assistance.

 

[Chuck Leeper]

I'm using the Wilwood 1.125" bore unit. [What Wilwood tech suggested.]

 

[TexasT]

What do you want to know?
I put a Cadillac mc on mine but in exchanging emails with Mr. Kirban it became apparent that this mc was used on many vehicles.


Link to my thread
http://www.ihadav8.com/forum/index.php?topic=4228.0

Posted from the TurboBuick.Com mobile app

 

[Boost231]

I'm using the Wilwood 1.125" bore unit. [What Wilwood tech suggested.]

same here

I have a Willwood Master cylinder part No. 260-8556-bk

 

[TexasT]

What does the wilwood do other than look mighty nice?

Posted from the TurboBuick.Com mobile app

 

[Boost231]

Same as any other mc

Posted from the TurboBuick.Com mobile app

 

[we4Mateo]

Will this master cylinder work with a vacuum conversion too? I have a 87 Monte booster.

 

[Jerryl]

Thanks guys.
Going with the Cadillac MC.

Edit:
After reading the step by step from TexasT, I may need to go with the stock 30lb cast unit.
The car currently has a linelock under the PM. Guess I will need to take it apart and see where I end up based on the lines.

 

[Jerryl]

What do you want to know?
I put a Cadillac mc on mine but in exchanging emails with Mr. Kirban it became apparent that this mc was used on many vehicles.


Link to my thread
http://www.ihadav8.com/forum/index.php?topic=4228.0

Posted from the TurboBuick.Com mobile app

Thanks for the picture Tex.

 

[novaderrik]

What does the wilwood do other than look mighty nice?

Posted from the TurboBuick.Com mobile app

it makes your wallet lighter so you can go faster.