You can type here any text you want

IF I'm missing bolts and brackets...

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

SITHV6

Move against the Jedi 1st
Joined
Sep 21, 2002
Messages
321
ok, my 86/87 T-type was first being dismantled for pistons upgrades and cam change when the shop that a friend owned and ran suddenly went to crap and he lost the shop and now I'm forced to take my TR to another shop to get finished... I was hoping the car had most of the brackets and bolts either still on the engine or in the trunk...but after further inspection and only a scant few bolts in a Folgers coffee can, I SERIOUSLY doubt I have everything I need to put my baby back together! What Buick car (besides another 86/87 TR) would be a good donor for brackets and bolts for say...alternators and AC compressors and the lot? granted not just any motor will have turbo brackets and such, but will 86-89 LeSabers and other 3.8 buick motors have what I need to put my engine together? TIA
 
All the brackets on the front of the engine are 86/87 turbo specific. I would try going back to the shop 1st to see if I could round anything up. If no luck contact Mike McCoy or Brian Weaver as they would be most likely to have everything you want in stock. Or try a post in the parts wanted section. You may also want to pull an engine diagram from the GN/Ttype board for reassembly.

Dang....that sucks.
 
Oh btw....

If you are not comfortable putting it back together, I would advise finding a shop that knows these cars. You should not have any trouble as they're many knowledgeable shops in Fla.
 
Back
Top