You can type here any text you want

Intake backfire?? Long-ish

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
So for the WB all I will need is the cable #3744 correct?

Martin,
Sorry, Not sure what that cable is.
Just need a WB. Download the PL software, and make sure to puchase one that is listed on the pulldown menu.
Than contact TT, order the chip, and you are good to go.
 
Hi Jerry
Well I talked to Eric at TT and he said my injectors were OK with the TA-49 as long as I was spraying alchy. I was leaning toward 60lbs injectors with a WB chip-he would save me $25. Eric said he would go with the NGK Powerdex AFX or PLX SM-AFR. All this is on hold for the moment because of a new roof ect. BUT I AM going to get the power logger no matter what at this time. The wide band will have to wait, because I do not know exactly what pieces parts I need with one. I shouldn't need a Gage with one because I can log with the data logger---right?? This should tell me how much more I have left in the injectors. Still am keeping my eyes open for a maf & translator.
I have been running my self a lot helping with other peoples projects.
AND Just to add another layer of excitement , my rear fillers are starting to crumble out of no where. I will get it running in top form before I go after those...just incase I wrap it around a tree or something.
Have to go get bathroom parts now,so I 'll ask more about what WB pieces I'll need with out getting to much.
Thanks again
Marty
 
....... The wide band will have to wait, because I do not know exactly what pieces parts I need with one. I shouldn't need a Gage with one because I can log with the data logger---right?? ....

Correct.
All you need is a WB, setup (Around $250) and connect the white output wire from the WB to the analog block of the PL, set the PL console to matrch the WB you have, and you are ready to view and log AFR on the laptop.
 
Back
Top