Is this the correct ecm

[PaulRV6]

I got this ECM from rockauto and I want to be sure it is correct and will work. So far I am having trouble getting a spark at the plug. Put the plug against ground to check and zero spark. Then led me to think of the ECM. Unless I can't check the spark in this manner. Thanks

 

[PaulRV6]

Sorry forgot to attach photo.

 

[jckcolarusso]

crank sensor will cause no spark and ignition module

 

[Anthony P]

yes, correct part # for ecm. it's the updated # from the factory 122-7148. It's the one I suggested you get.

 

[PaulRV6]

Ok thanks Anthony. I didn't remember that but I did buy the one you suggested. Just trying to figure out why no spark unless I can't check it the way I thought.

 

[THensley]

I have never had a crank sensor fell and all my no start were cam sensor.

 

[PaulRV6]

ok thanks. What about checking for spark by holding plug to ground? Is this still valid on this type ignition system? I am going to check crank sensor wiring since I remember reading something about the factory wiring diagram being wrong.

 

[GNVenom]

ECM has nothing to do with startup spark. Cam and Crank sensor both have to be functional to initiate a spark. Two fuses relative to the ignition should be checked.

 

[TurboTGuy]

ECM has nothing to do with startup spark. Cam and Crank sensor both have to be functional to initiate a spark. Two fuses relative to the ignition should be checked.

Check the fuse to the ECM by the Battery, too. (Orange wire)

Ya never know with these cars...