J & E .030 pistons/new wiseco .927 pins

[johnplogii]

I have a set of used J & E 3.830 pistons with the used pins & used rings. These are for stock stroke/stock rod length. $250 shipped

Set of 6 NEW wiseco .927 pins $50 shipped.

Thanks

 

[johnplogii]

Lots of people PM'd me for pics so I will just post them here. The pins are new .927 x 2.500 x .150 wall, came with new wiseco pistons.

The pins feel a little sloppy to me in the J&E's. I would plan on opening them up & running a slightly larger pin.

Thank you

 

[Ken Adams]

Pm sent re Wiseco pins

 

[hurricanepb]

pistons

Interested in your pistons, about How many miles or on them?
What size pins would i need?

 

[johnplogii]

TTT still for sale.

 

[johnplogii]

TTT make offer! Need $$ to support racing habbit!

 

[bison]

What is the compression height and what is the dish?

 

[johnplogii]

They are stock replacement Brian, off the shelf J & E's.

 

[bison]

1/16 comp rings? What is the pin bore?

 

[johnplogii]

1/16 comp rings? What is the pin bore?

Brian, I'm pretty sure the rings are 5/64ths, the pin bore would be a loose .940, they came off of a set of stock rods. I buried these a few months ago in my storage room. If you are real interested I will dig them out. I had two sets of these bought from the same vendor & I know the other ones had 5/64ths rings. Let me know.

 

[johnplogii]

$200 shipped? These are NOT cheap pistons if you purchase new.

 

[3.8L V-8 eater]

PM sent!!!

 

[rede4christ]

JE Still Available?

 

[johnplogii]

Yes sir!

 

[cml87type]

Pistons still available? Thanks Clayton

 

[johnplogii]

Yes they are.

 

[buickgn87]

Rings for these Pistons are 1/16 - 1/16 - 3/16

Part Number - J100F638305

$112.95 from Summit

 

[cml87type]

could I get the number on the inside of the piston? trying to find out about the pins. you're saying the pins that are in them feel loose to you, correct? i think i'm following now. had read what i wanted to read i guess. it's the actual piston that has the wear and not the pin? i'm interested, obviously. i like j e products. did you actually use these or just had intentions? thanks Clayton

 

[johnplogii]

These came out of a good running motor that made no noises. Yes, I am saying that I would want to run a larger pin because they are somewhat loose. If you are really interested I will have to dig them out of my storage room.