Just brought a auto meter boost gauge

[natedog910]

Where do I connect it,do I eliminate the factory boost gauge sensor on the passenger side in the engine compartment or do I install a tee fittings . Do I need to have the factory one connected at all thanks in advance for your help

 

[williamsGN]

Just tee it in.

 

[Dhos1]

I just redid this. Mine was getting a shitty reading so I just teed it off to that line near the AFPR and got great vacuum. I'll take pics on the a.m.

 

[MauDeuce50]

You don't need to eliminate the factory gauge, just use a T to tap into the line coming from the MAP sensor and run the new line to the new boost gauge

 

[GNTtypeKid]

http://www.ebay.com/itm/Boost-Gauge...Kit-/231099077142?hash=item35ce941216&vxp=mtr

I used this universal kit for my boost gauge that didnt have all the tubing and fittings. Just did it a couple of weeks ago.

 

[Chuck Leeper]

Mechanical or electric ga??

 

[natedog910]

Just tee in the mechanical gauge to the the map sensor . My question is as the boost is climbing its very erratic not a steady climb to 17 psi ..am quess it's not the boost gauge