Just finished a powerstroke ic install

[ronbuick]

Hey Nick, where did you get your pipe from, remember I'm in Idaho, lol..
Ron

 

[Nick Micale]

Try Summit.

You do have weekly deliveries there in the wilderness don't you?

 

[justabuickv6]

If you want to use aluminized 3 inch, you will need (3) Walker 41685 and (1) Walker 42344 pipes. The 41685's are $25.99 each and the 42344 was $22.99 at my local part store. You will also need (1) 3 inch to 2 inch transition hose , depending on your turbo and (1) 3 inch to 2.5 inch transition hose for your throttle body. I purchased my transition hoses from Road Race at $22 each. I also purchased two feet ($22.00 a foot) of 3 inch to mate the pipes together. Clamps and a little bit of your time should be about all you'll need.

 

[ronbuick]

Thanks, for all the info, I will be using 2.5 form the IC, the OD on the IC is 3.25 and I will go from there, I was out in my shop last nite after work and kinda checking things out for my next move.
again thanks.

Ron

 

[ronbuick]

Worthog, your links do not work anymore??

Ron

 

[Worthog]

Originally posted by ronbuick
Worthog, your links do not work anymore??

Ron

Should be working now.

 

[tonka]

Originally posted by Worthog
I picked up 5psi on the footbrake and around 4psi at WOT vs the stock IC. Pretty hard to drive the car in 17 degree weather though

Unfortunately, I've picked up some compressor surge at around 8psi. Oh well, sacrifices must be made in the name of boost. [/B]

I also swapped from the stock IC to the PS, looks like I've gotten more than 5 psi increase WOT at the manifold without adjusting the wastegate. No surge either as of yet. It's unreal how much of a difference.