1KWIKSIX
Well-Known Member
- Joined
- Sep 29, 2007
- Messages
- 3,120
I am experiencing a very small leak since installing this deep aluminum pan. Seems to be originating (for the most part) from the left front corner (drivers side) gasket / sealing area. I've even removed the pan once & installed a new fibre gasket & ensured the bolts were snugged down in a criss cross pattern. Also appears that some of the allen bolts holding the pan have very small amount of transmission fluid on them. Do any of these bolts require some sort of sealer to prevent leakage?
Any one else experienced this problem?
I'd appreciate any insight or comments to resolve this issue.
thanks
dave
Any one else experienced this problem?
I'd appreciate any insight or comments to resolve this issue.
thanks
dave