List of GO FAST parts for sale

[turbocliff]

I have a complete fresh motor from throttle body to pan (may part out):

NIB Accufab 70mm TB / 70mm Plenum both POLISHED
Stock lower intake
Stock fuel rails with 72# injectors / adj. FPR
PTE race ported stock heads with bigger valves (BEST IHAVE EVER SEEN)
84/85 Hot air block with billet caps
4130 Zero balanced stock stroke crank
Stock rods with ARP bolts
JE pistons
Billet hydraulic roller cam / valve springs, hardened pushrods, etc.
Harlen & Sharp shaft mount rockers
Hi volume oil pump
Factory balancer machined to zero balance (internally balanced)
Just assembled, never fired!

Complete motor TB to PAN from water pump to flex plate ready to drop in.................................................................$4,000.00 OBO May part out. (would want $2,500.00 for shortblock only with cam)

28 Spline MOSER c-clip axles.............................$200.00 OBO

"ebay headers": NIB.........................................$150.00 OBO

Gen VI DFI ECM / adapter harness......................$350.00 OBO

Stock headers modified for 4 bolt turbo, along with mild steel 3.5" DP and turbonetics external wastegate (comes with) ......$250.00 OBO

M/T 325-50-15 Drag Radials with about 12-15 passes on them, they were screwed onto wheels, still 60-70% life left easy....$250.00 OBO

Parts I am looking for:
AMS1000 turbo controller
275-50-15 MT Drag radials (new or like new)
Precision 70GTQ or 71GTQ

Thanks for looking-

Cliff

 

[WINDMILL]

parts

send me some pics of the stock headers for 4 bolt turbo and the downpipe. turbomonk@homail.com

i'm interested

 

[1BADWE4T]

Stock headers modified for 4 bolt turbo, along with mild steel 3.5" DP and turbonetics external wastegate (comes with) ......$250.00 OBO

Cliff, will you split these items up? Interested in downpipe and wastegate, thanks sir.

 

[RICHIE HIGH PSI]

pm sent

 

[turbocliff]

Cliff, will you split these items up? Interested in downpipe and wastegate, thanks sir.

I might, PM me an offer-

Cliff

 

[turbocliff]

pm sent

Replied Sir Richie!

 

[turbocliff]

To those requesting pics.... youll have them in an hour or so-

 

[pauljleblanc]

Interested in axles. Email @ pjl3@sbcglobal.net.

Thanks

 

[turbocliff]

Hey Guys, my appologies but I apparently don't have photos of the parts listed. These all just came off my car at a friends shop, and I should have photos of them soon. My appologies for any delay.

 

[2turboRX7]

70mm Tb

Put me in line for the 70MM TB. How much are you asking? Shipping to 06082.
Thanks,
Keith

 

[rarewe4]

Hey intrested in the roller rockers. How much are they ? Are they new or used? Rocker ratio? Please contact me if you still have them i am local so i can pick them up. email rarewe4@hotmail.com

 

[kingots2004]

you have a pm sir

 

[turbocliff]

Looks like Headers / DP / WG / four bolt exhaust housing are sold.

Thank you,

Cliff

 

[PHILBUILT65]

im interested in the injectors and the dfi ,is it sequential? shipping to 74112 tia phil k
ps if youtake the short block apart im interested in the crank and cam

 

[turbocliff]

I miss spoke PISTONS ARE TRW NOT JE.

MY appologies for the error.

The DFI is not sequential, and I would consider selling shortblock seperate, but will not sep crank from rest.

Thank you,

Cliff

 

[turbocliff]

List Updated!!!!!! Prices Updated

Heads:
PTE race ported stock heads with bigger valves (BEST IHAVE EVER SEEN)
Harlen & Sharp Shaft mount 1.65 Rockers
Hyd Roller Valve Springs (Revolution X kit)
GN1 Valve covers.................................................$1100.00 OBO

Shortblock:
84/85 Hot air block with (2 center) billet caps
4130 Zero balanced stock stroke crank
Stock rods with ARP bolts
TRW pistons
Billet hydraulic roller cam / hardened pushrods, etc.
(210/215 Revolution X Roller Cam Kit)
Hi volume oil pump
Factory balancer machined to zero balance (internally balanced)
Just assembled, never fired!...................................$2500.00
without cam / lifters.............................................$2250.00

28 Spline MOSER c-clip axles.............................$150.00 OBO

"ebay headers": NIB.........................................$150.0 0 OBO

Gen VI DFI ECM / adapter harness......................$300.00 OBO

M/T 325-50-15 Drag Radials with about 12-15 passes on them, they were screwed onto wheels, still 60-70% life left easy....$200.00 OBO

Parts I am looking for:
AMS1000 turbo controller
275-50-15 MT Drag radials (new or like new)

 

[turbocliff]

HEADS - SOLD

CAM/LIFTERS - SOLD

EBAY HEADERS - SOLD

325 DRAG RADIALS - SOLD

All that remains available is:

Shortblock (less cam/lifters).....................$2250.00

28 Spline c-clip axles...............................$150.00

GenVI DFI / adapter harness.....................$300.00

Also, I am no longer looking for the 275 drag radials, but still in the market for an electronic turbo controller (prefer AMS1000 but will consider others.)

Thank you my Buick Friends!

 

[turbocliff]

Update

HEADS - SOLD

CAM/LIFTERS - SOLD

EBAY HEADERS - SOLD

325 DRAG RADIALS - SOLD

All that remains available is:

Shortblock (less cam/lifters).....................$2250.00

28 Spline c-clip axles...............................SOLD

GenVI DFI / adapter harness.....................$300.00

Also, I am no longer looking for the 275 drag radials, but still in the market for an electronic turbo controller (prefer AMS1000 but will consider others.)

Thank you my Buick Friends!

Updated : Axles sold, only Shortblock and DFI remain! Damn this stuff is selling fast. Must be that time of year!