Lost the fittings that go from transmisson to cooler
- Thread starter IowaGN
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
- Joined
- Jul 28, 2020
- Messages
- 876
From member Heskahoka:
Can confirm. Just did this job plumbing the tranny into my radiator and external cooler. I have a GN1 radiator, but the fittings/fitment should be the same.
90 degree fitting on the radiator:
-The male end going into the radiator is 1/8 NPT.
-The female end to the transmission line is 5/16 Inverted flare.
When I plugged mine I used a 1/8" NPT. I used the oil cooler fittings for my trans cooler.
If you can't find them, I believe I have them.
Can confirm. Just did this job plumbing the tranny into my radiator and external cooler. I have a GN1 radiator, but the fittings/fitment should be the same.
90 degree fitting on the radiator:
-The male end going into the radiator is 1/8 NPT.
-The female end to the transmission line is 5/16 Inverted flare.
When I plugged mine I used a 1/8" NPT. I used the oil cooler fittings for my trans cooler.
If you can't find them, I believe I have them.
