Meziere Electric Water Pump Belt Clearance Details

[87TurboGN]

Thought I would post this for viewers.

Champion Bracket with Arm Extension required for Electric Pumps
RJC Alternator Pulley
RJC Power Steering Pump Pulley
RJC Racing (Small, notstock diameter) Crank Pulley
46" Goodyear Belt with this combo

Plenty of Clearance

 

[GNBRETT]

Looks sharp.

 

[Boost231]

looks good.

 

[lazaris]

Whats the Arm extention?

 

[87TurboGN]

Whats the Arm extention?

It is the longer brace for the rear of the alternator provided by Champion upon request.

 

[49-blues]

Will this work probably with a different belt if keeping the ac compressor in tact?

 

[87TurboGN]

Will this work probably with a different belt if keeping the ac compressor in tact?

Do not know on that one. Call Tom at Champion.

 

[lazaris]

It is the longer brace for the rear of the alternator provided by Champion upon request.

So this pushes the alternator further out away from the engine?

 

[87TurboGN]

So this pushes the alternator further out away from the engine?

It uses a different mounting point on the back of the alternator, turn it over towards the power steering res., therefore, lowering the pulley and clearing the water pump.

 

[Alky V6]

Is that water pump designed for extended street use?

 

[Otto J]

Is that water pump designed for extended street use?

The meziere pumps have a hour life according to them.
I ran one on my LT1 camaro for years with no problem.
THe good thing is the pump motors are all interchangable.

 

[lazaris]

It uses a different mounting point on the back of the alternator, turn it over towards the power steering res., therefore, lowering the pulley and clearing the water pump.

Good to know. Thank you. Nice set up there. :smile:

 

[87TurboGN]

Is that water pump designed for extended street use?

There are 2 different models yoou can get. Standard and Heavy Duty, which moves more h2o and supposedly has longer life. That is what I have.

 

[EVIL87]

looks good

 

[49-blues]

What crank/rod sizes did you use on your stage2 combo? Mine will be similar.

 

[GNVYUS 1]

Can you list what it cost to pull this off?

It looks like you're in over $500.

 

[87TurboGN]

What crank/rod sizes did you use on your stage2 combo? Mine will be similar.

Mine is a 109 with 6.350 K1 Rods and CAT 3.625 stroker Crank.

 

[87TurboGN]

Can you list what it cost to pull this off?

It looks like you're in over $500.

Meizere Water Pump, Inlet, and Relay $438.00
Champion Alt Bracket $250.00
RJC Underdrive Racing Pulley $149.00
RJC Other Pulleys $100
Belt $20

If you sell your other parts you will save some $$

 

[slamming 6]

Will this work probably with a different belt if keeping the ac compressor in tact?

Yes I have the part# some where.

 

[1BADTT]

Thanx 4 sharing...

Could this be done with a stock diameter RJC crank pulley?