Modded ECM, Engine Harness, MAF Trans+, stock ECM, stock coilpack

[CTX-SLPR]

Howdy,

I'm completely committing myself to the development of the ability to use the L67 OBDII computer system to run my engine so I'm selling off my stockpile of stock type computer stuff. All prices are without shipping and buyer pays actual shipping from Dayton, OH to you. Package deals will be considered.
Stock ECM, untested but I'll garentee it to be not DOA otherwise I'll buy it back. $50.00
Red Armstrong Modded ECM, brandnew never used. $200
Stock '86 LC2 wiring harness, its dirty and nasty but intact. $100
MAF Translator Plus (MAF Trans+) never used with instructions. $155
Stock Coil Pack and Module, same garentee as the ECM. $50
Type II Coil Pack and Module, same garentee as the ECM. $75
Crower Stage II Solid Roller Lifters and 3/8" pushrods $75
ROL 3.8L Headgaskets, $15 (came from Red Regal T's kit, they are worthless to me with a 4.1)
Random stuff from a 4.1L, make offers on all of it as its just taking up space.
Complete 6293 Heads with a few missing nylon rocker buttons
Bare 8445 Heads with an unknown port job started
4.1 V-belt balancer
valve covers
random brackets and pullies

Pictures are available upon request.

Thanks,

 

[VASCAR 3]

I will buy the modded ecm red armstrong.Doug Do you take paypal.

 

[GNguy]

Put me in line for the engine harness......Can you send me some pics? jsteiner@gmail.com

 

[CTX-SLPR]

Wow... that was quick and I didn't even get any emails telling me ya'll had posts. I'll box the ECM up tonight and get it weighted tomorrow and such for a shipping quote.
GNGuy, you're first on the harness, I'll get it layed out tomorrow on a good background and take some pictures of it.

I forgot to add I have paypal swimgangsta@yahoo.com if you prefer to do that, but money orders are always accepted.

 

[BW Jones]

parts

I'll take the stock coil pak & ign module for $50. I'll also take the trans +. I will send you a PM.
Thanks

 

[CTX-SLPR]

I already have someone interested in the Trans+ via PM, however from here on out PM's are for Questions, this post is for both questions and all interests, dibs, purchases and such. I'd like to keep this transperant if possible. If you PM me your shipping info I'll get a shipping quote to you address for the MAF Trans+ and the coil seperately for now and combine them if the first person backs out.

 

[tumarido]

Type II Coil Pack and Module

Put me next in line for Type II Coil Pack and Module, same guarantee as the ECM. $75 Can you send pix and shipping info to the E-mail I PM you.

TIA
Peter

 

[tumarido]

any up dates


TIA
Peter

 

[CTX-SLPR]

My appologies for the delay, I just got home after a long 2 days. I've got the weights and dimensions of packages aswell as the pictures. I'll be getting information out to all who requested it here in the next hour or so.

 

[Waco84GN]

wiring harness

Hi centex sleeper. Is the wiring harness still available? Thanks Jerry Berger; Waco, Texas

 

[imjoesnuffy]

?

Either of the coil packs and modules still available?

 

[Louie L.]

Is the Trans+ sold? If not what Ver. is it? Im very interested.

 

[CTX-SLPR]

Sold
Pending Payment
Interest
Stock ECM, untested but I'll garentee it to be not DOA otherwise I'll buy it back. $50.00
Red Armstrong Modded ECM, brandnew never used. $200
Stock '86 LC2 wiring harness, its dirty and nasty but intact. $100
MAF Translator Plus (MAF Trans+) never used with instructions. $155
Stock Coil Pack and Module, same garentee as the ECM. $50
Type II Coil Pack and Module, same garentee as the ECM. $75
Crower Stage II Solid Roller Lifters and 3/8" pushrods $75
ROL 3.8L Headgaskets, $15 (came from Red Regal T's kit, they are worthless to me with a 4.1)
Random stuff from a 4.1L, make offers on all of it as its just taking up space.
Complete 6293 Heads with a few missing nylon rocker buttons
Bare 8445 Heads with an unknown port job started
4.1 V-belt balancer
valve covers
random brackets and pullies

 

[87we410877]

How much for the valve covers? Are they stock?

 

[CTX-SLPR]

Yes they are stock 4.1 and 3.8 NA motor valve covers, nothing special just stamped steel. NOt sure I know how much to ask for them.

 

[Lhorn]

Interested in the stock ECM if it's still available. Has it been modded for use with DS? I'll take as long as you take it back and refund if there's anything wrong with it. (Last bargain ECM i bought throws all kinds of codes).
I'll send you a PM.

 

[Lee Thompson]

Crower solid lifter and 3/8 pushrods

I'll take the lifters and pushrods.
46056 --let me know how much.
BTW what is the length of pushrods.
Still want them--just curious

 

[imjoesnuffy]

?

Anything left?

 

[Lee Thompson]

?

Is this STUFF for sale or not?

 

[CTX-SLPR]

Pending Payment
Interest
Stock ECM, untested but I'll garentee it to be not DOA otherwise I'll buy it back. $50.00
Stock '86 LC2 wiring harness, its dirty and nasty but intact. $100
Crower Stage II Solid Roller Lifters and 3/8" pushrods $75
ROL 3.8L Headgaskets, $15 (came from Red Regal T's kit, they are worthless to me with a 4.1)
Random stuff from a 4.1L, make offers on all of it as its just taking up space.
Complete 6293 Heads with a few missing nylon rocker buttons
Bare 8445 Heads with an unknown port job started
4.1 V-belt balancer
valve covers
random brackets and pullies

The above is still for sale however I think the lifters and pushrods have been claimed. I've stashed them somewhere and I'll have to find them and measure the length of the pushrods. I have pictures of the harness available for those that are interested, turns out it has a few cut wires but has just about all of the relays and the Booste Control Solenoid with the Y still on the harness so I'll leave the price the same.