I have the engine in my 87 project car and tried to fire it up. The wiring harness has been somewhat butchered so it may be the problem. The service engine light is on but the ALDL connector has been cut out for whatever reason.
I am getting spark and fuel pressure is 40 pounds at the rail. The engine turns over but doesn't fire. I took a plug out and it is dry so I assume I am not getting fuel. I verified the cam and crank sensor are working with a volt meter. I tried swapping the ecm with the one out of my 86 to no avail.
What are all the sensors that have to be hooked up and working for it to start? I checked to make sure the orange ECM wire is hooked up. Since I bought this car in pieces, I am not sure everything that needs to be hooked up is. Thanks for the help. I'd love to get this thing running!!
I am getting spark and fuel pressure is 40 pounds at the rail. The engine turns over but doesn't fire. I took a plug out and it is dry so I assume I am not getting fuel. I verified the cam and crank sensor are working with a volt meter. I tried swapping the ecm with the one out of my 86 to no avail.
What are all the sensors that have to be hooked up and working for it to start? I checked to make sure the orange ECM wire is hooked up. Since I bought this car in pieces, I am not sure everything that needs to be hooked up is. Thanks for the help. I'd love to get this thing running!!