Motor mounts

[BoilerDeez]

Tips or tricks on changing out motor mounts on one of these cars? Thanks in advance.

 

[TurboTGuy]

Tip # 1:

Use HR PartsNStuff Motor Mounts.

 

[1986 Buick GX1]

Tips or tricks on changing out motor mounts on one of these cars? Thanks in advance.

Put the car up on jack stands if it isn't already (Hehe) to give yourself some elbow room.
Disconnect the battery as the starter is close to the passenger mount. Do one at a time. Pull the long frame bolt out. Raise the motor a couple inches to make some room and unbolt the mount from the block. Reverse the process. Do both sides.
It will take a little while as space is tight. Sorry I don't have bolt head sizes, it's been a while.

As TurboTGuy says, use H&R motor mounts or stock mounts with the RJC Racing motor brace.

 

[turbofrank]

Use flat piece of wood under oil pan jack her up and go at it.

 

[BoilerDeez]

Tip # 1:

Use HR PartsNStuff Motor Mounts.

Those are the ones I got! Lucked out there I guess.

 

[BoilerDeez]

Thanks guys. Appreciate the input!

 

[BoilerDeez]

Got er done. Wasn't fun, nor fast, but it's done. Thanks for the help.

 

[LSTTYPE]

Ok so how do I install motor mounts in my tta?