My 200R4 is shot, What do I need for a TH400?

[mikestertwo]

Sounds like you are talking about the entire harness, not just the tcc solenoid. The solenoid only has 2 wires on it then there is 1 wire for the 3rd gear switch and 1 wire for the 4th gear switch. Normally, you just splice the new solenoid into the old harness.

 

[Alky V6]

Are there 2 pressure switches on the valve body?

 

[ineil]

I am not sure what the pressure switches look like. I only saw the 4th gear switch.

 

[Alky V6]

Does not sound like a GN VB.

 

[SNOWBIRD]

DOCTOR.WANG,..what do think.....my trans was built with a 570 valve and 13 vane pump??????

 

[Alky V6]

DOCTOR.WANG,..what do think.....my trans was built with a 570 valve and 13 vane pump??????

I see no problem there.

 

[FastRegalWE2]

I know you got a trans, just thought Id throw this out there, you dont have to buy a new shifter. YULLOSE made a shifter lock plate to make the stock shifter function with the TH400. Brian Weavy is selling them now. I bought one myself for my TH400 swap and its a nice quality piece. :biggrin: