My new Stage 2 Project

[87we410877]

Its a start. Stage two block un touched un machined.

 

[GBGN1]

Cool , Them are pretty scarce . I wish I could have found one too (for a reasonable price). Good luck with it!

 

[turboclam]

Only about $12000 more to complete it, if you're lucky. Nice find. On-center? Have any goals in mind?

 

[87we410877]

Only about $12000 more to complete it, if you're lucky. Nice find. On-center? Have any goals in mind?

It is off center. Virgin block. Paid $2500. Goals are 800+ to the tire then tune it down to about 550-600 for the street on E-85

 

[norbs]

What heads? turbo?

 

[turboclam]

4.1 ? I was fortunate to find a virgin off-center 4.1 stage II for a $1000. Cool blocks. Does it take the BBC seal or a Buick seal? What rotating combo do you have in mind for it? Our goals are similar but won't be running E85. Post some more pics.

 

[87we410877]

4.1 ? I was fortunate to find a virgin off-center 4.1 stage II for a $1000. Cool blocks. Does it take the BBC seal or a Buick seal? What rotating combo do you have in mind for it? Our goals are similar but won't be running E85. Post some more pics.

3.8. Going with ported champions and matching intake. probably precision 70mm DBB billit wheel. I have a SCAT forged crank stock stroke, K1 rods, CP pistons.

 

[turboclam]

Splayed caps? Wonderful not messing with a girdle. I would leave the bore on the smaller side due to the rarity of the block. A friend of mine bought a 012 virgin block about 9 years ago and paid $2800 + shipping. U did good.

 

[87we410877]

Splayed caps? Wonderful not messing with a girdle. I would leave the bore on the smaller side due to the rarity of the block. A friend of mine bought a 012 virgin block about 9 years ago and paid $2800 + shipping. U did good.

Yes, Splayed main caps.