Need a blockoff plate for the top of the Throttle Body?

[turbo nasty]

Going to remove the vac block (hate the way it looks) and will need a block off plate.
I searched and saw a few pics but no mention of manufacture.
Any vendors making them?
Thanx

 

[blackgn1]

Tom at Champion has them. They are very nice.

 

[turbo nasty]

Outstanding thanx.

 

[Phoneguy]

i will be needing one as well, Thanks !!

Bryan

 

[Razor]

I went to home depot bought some 1.25 wide aluminum. Cut it. Polished it. drilled a couple holes and used some countesink stainless screws.

Not hard at all project. But if Tom has one.. money can buy you happiness then

 

[Razor]

Here's a pix

 

[SIXBANGR]

so where do they go if you block it?

 

[turbo nasty]

Normal places Plenum, spacer or lower intake. First 2 being the most common. I spoke with Tom and im getting a plate..... it has a oring to seal and not to pricey.

 

[The_Six]

here is a pic of mine powder coated black I just bought the lowes 1.25 wide aluminum and drilled the 2 holes I still have like 2ft of the stuff if you guys ant any to make your own Ill even drill the 2 holes if you cant no big deal. you can go to my website to and see hoe I drilled the intake for the block. https://sites.google.com/site/whatwazithinking/grand-national/vacuum-lines
http://s216.photobucket.com/albums/cc31/earl87gta/86 Buick GN/?action=view&current=IMG_1678.jpg

 

[Steve]

Here is a pic of mine on my 67 Firebird LC2 hybrid car. I made it from a scrap piece of aluminum I had laying around in about 20 minutes. I made this plate, a EGR blockoff and the IAC angle adapter all in one evening and saved about $150 and got the satifaction of doing it myself.