need help with my 85 pt.2

[japSW20]

hey peoples,I pulled my turbo out and now its time to put everything back together,Theres only one hting holding me back.I cant find the front turbo gasket.I dont know if its a donut type or flange type,I even went to the GM dealer and they had no clue.Its the gasket that goes between the up-pipe and turbo exhaust inlet

 

[skostur79]

its discontinued at the dealer

felpro makes one but the number ill have to think,,,,

call a part store that sells felpro,

 

[TurboRegal84]

The gasket is a flange type gasket/adapter. Usually they crack or break!

I am sure someone in here has a spare! Try Brian Weaver!


if not some upgrade to the ATR Up pipe that does away with it all together!

Here is a picture of what you are looking for:

 

[japSW20]

The gasket is a flange type gasket/adapter. Usually they crack or break!

I am sure someone in here has a spare! Try Brian Weaver!


if not some upgrade to the ATR Up pipe that does away with it all together!

Here is a picture of what you are looking for:

thanks,that looks more like what i need,the car had a donut style gasket do you have any idea how much or were I could get more information on a new up pipe?

 

[mybuick]

call atr and give them this part number (gasket rp556 $11.95) (up pipe AA704-84 $89.95)
phone number is 1-864-972-3800

 

[japSW20]

Ok so i managed to find the gasket and put everything back together,turned on and idleld like a charm,but when i goto take a spin the car will sit and sputter when i mash the gas,Like if its just dumping fuel whenever i go WOT it does the same,and also lucky me I swapped the brakes over to vacuum and now the booster is poped :frown: any ideas on the WOT problem?

 

[japSW20]

also the ECM doesnt throw any codes??????