Need injectors for the giveaway car

[INEEDAGN]

Long story short, I told Bweavy I had a set of 009's that I was going to get cleaned and flow tested for the Toys For Tots raffle car, and that deal fell through. I now feel like a whole bag of a$$es and am looking to make this right.

I need to buy a known good set of injectors to donate to Bweavy. Prefer 009s or bigger but let me know what you have. You will be shipping them straight to Gbodyparts. Please go easy on me. :redface:
Thanks in advance.

Bob Koch

 

[jdpolzin]

Man I just gave away a set of 36#ers with a chip. I would have loved to donate them to the charity car. Someone please step up!

 

[Chuck Leeper]

I'll help!!

If anyone has a set, send them to me, and I'll clean and flow test, at ZIP cost. I'll then send them to Bweavy, at ZIP cost!
Chuck Leeper
1310 Price Mill Rd.
Madison, GA. 30650
Only takes me a day to do them, but the mail may be getting a bit slow, so don't waste time...I'll "git'r done!

 

[INEEDAGN]

I will add that if someone donates the injectors, I will Spring for the walbro 340 and hotwire kit. May even hae an adjustable top regulator around here somewhere.

 

[Boost231]

i will pitch in for a set of new 60's if need be.

 

[craggar]

I have a spare set of stock ones that came with my car. I'm pretty sure I remember where I put them so I wouldn't lose them.:wink: I will look tomorrow and if I find them I'll send them to Chuck.

 

[corymc]

i have some older 009s that were new when i got them told that they were bad from the person i sold them to and i refunded him and go tthem back. I can send them to be checked to see if they are any good as i have no use for them anymore.

 

[INEEDAGN]

I reread the threads and they have an AFPR so that's done.

Your stock injectors will be accepted as a donation, but they will probably be ebayed and the cash sent to toys for tots as the car already has stockers. I'm trying to hook them up with bigger injectors to support the PT54 turbo, front mount, 3"dp, etc.

EDIT: If you would donate those 009s that would be great! You should get them on their way so we know if they are any good. As I stated I would do the fuel pump upgrade if someone else had the injectors.

We could throw money together for new if need be, but a freshly cleaned set of 36-50 lb. would be adequate and would save money so someone could get the fuel pump to go with it. Just thinking out loud here.
Thanks guys!
bob

 

[1BADWE4T]

I have a set of 43lb green tops that have some miles on them but worked good til I swapped them out, let me know if they are needed, and I'll send them to chuck to be cleaned and inspected.

 

[Bweavy]

That's great guys. I think 42.5's with the SMC alky kit will be more then sufficient.

We have a hot wire kit from Caspers but we do need a pump.

 

[1BADWE4T]

I have a set of 43lb green tops that have some miles on them but worked good til I swapped them out, let me know if they are needed, and I'll send them to chuck to be cleaned and inspected.

I also have a TT chip for the 42.5's for alchohol if needed.

 

[INEEDAGN]

Ok so far it's between underdogGN (who PMed me), 1badwe4t, and corymc all who have 009s. Unless someone offers some 50s in the next day or two it's between them to see who wants to give up a set. We really should get these on the way to chuck on monday or tuesday to give them time with holiday shipping and such. If you all want to send them, then they can all be cleaned and the remaining sets can be ebay'ed and the profits go to TFT.
I'll send bweavy a MO for the pump and for my TFT donation as well so I can enter the giveaway.
THANKS TO ALL!!

bob

 

[corymc]

thats fine i can send them out monday if nobody else does.

 

[machinegun]

Brian,

I just sent an email to you asking if there is anything I can do. If the pump is what you need, let me know and I will be more than happy to provide thru you. Drop an email return so we can get this going.

Jim Pliss

New School Performance

 

[NJ Torque]

Have a set of red stripe 40's with a TT chip if someone needs em...

 

[Chuck Leeper]

Git'm in the mail, guys!!
Chuck Leeper
1310 Price Mill Rd.
Madison, GA. 30650
706-342-3152 H.
770-265-5144 C. [Best]

 

[INEEDAGN]

MACHINEGUN: If you would like to get the pump I would talk to brian and cover the cost of something else. I WAS going to buy a walbro 340 through him but could easily do something else.

 

[corymc]

Chuck i will be sending them to you on monday

 

[INEEDAGN]

Brian,

I just sent an email to you asking if there is anything I can do. If the pump is what you need, let me know and I will be more than happy to provide thru you. Drop an email return so we can get this going.

Jim Pliss

New School Performance

Are you going to do the fuel pump?

 

[corymc]

shipped them this morning dont have tracking number yet used a ups puckup place but should be there in 2-3 days Let me know when you get them Chuck.
Thanks Cory