New Best!!!!!!!

[jdsgnx]

Just wanted to pass on the results from a local track rental,dead hookers II,

1.55 60ft
6.94 1/8th
102.4 mph
10.85 1/4
122.45 mph

THIS WAS WITH A MASS AIR!!!!!! , PUMP GAS, RAZORS DUAL NOZZLE ALKY KIT, 65LB INJECTORS,TURBOTWEAKED CHIP, 67mm TURBO, STOCK BOTTM END, 212/212 ROLLER CAM/ROLLER ROCKERS, STOCK PLENUM WITH POWER PLATE, AND ET STREETS 26/10.5

THE TUNE WAS 25LBS OF BOOST AND 25* TIMING IN 1ST, 23 IN 2ND,AND 22 IN 3RD.

I CANT SAY ENOUGH HOW MUCH I LOVE RAZORS ALKY AND ERIC'S CHIPS.

THE 2 GUYS HAVE DONE MIRACLES TO KEEP MINE AND MANY OTHERS CARS RUNNING AS STRONG AS THEY DO!!!!!!!!!!!!!

THANKS AGAIN JD

 

[matt87]

good run, looks like your mph from 1/8 to 1/4 is a little off though.

 

[Blazer406]

Congrats. What heads are you running? What boost did you launch at? What converter do you have?

Again.... great.

 

[bison]

Your kicking a$$ in the eighth but losing a lot up top. What converter are you running? Give us your tire height and rpm at the end of the quarter. What intercooler and heads are you running? My friends 87 T went 10.90's repeatedly @127 with a crappy 1.62 60' weighing 3750lbs . Eighth mph was just under 101mph. This was with nearly the same stuff you posted. His converter slip was 9%.

 

[jdsgnx]

Heads are P/P by champion and new valves, with matched intake

tires are 26 10.5

Yes I know its not picking up have the alky turned up to be safe!!!!!!

just trying to have fun and keep it together!!!!

convertor is a 3500 9/11, launching off foot brake at 7/8 lbs

thanks JD

 

[Razor]

Yup need to work on the tuneup past the 1/8..

http://www.n2s1.net/scott/DH2/Videos/BlackTA(Pauly)vsWhiteTurboTA.wmv

Probably got a 10.6 in it if we can get the mph up to 127-128 where it should be...

10.54.. dont think so

 

[WeSS]

congrats

now if only you would have spanked that lt1 car

 

[yullose]

There should definitely be more HP in that combo.

Jim (1nasty69z) and I both ran nearly identical ET's & MPH with bone stock unopened engines. (mid-10.90's @ 121-122)

There's lots of potential in these PT67 turbos.

Way to go !

Edit to add:

You may want to consider a 28" tire for a little more MPH...

 

[jdsgnx]

Already tried 28 in tires , car didnt like at all

only have 3.25 gears

running safe right now not tring to hurt anything

thanks JD

 

[yullose]

Already tried 28 in tires , car didnt like at all

only have 3.25 gears

Well that makes sense.

I was actually thinking about dropping down to a 3.23 gear in mine.