new memeber of f.a.s.t. family

[XxDarkSidexX]

just bought the f.a.s.t. bank 2 bank unit. My new engine harness came in today so now i just wait for the f.a.s.t. unit and in she goes. I can't wait!! Cal gave me a sick deal, with 2 wide band o2 sensors; 1 brand new and 1 used, plus he'll help out with creating a start up program. Along with all the other parts to the f.a.s.t. unit. The o2 harness and 3 map bar are also new parts, everything else is used but perfect condition.

all i have left on my parts list to fix my gn is;
axle or rim(havn't put the car on a lift to look at but I either have to replace my axles or just replace a rim. If its the axles TOM's will be the parts replacing it)
synthetic oil, and oil pan gasket
tranny fluid tranny (some b&m quick shift fluid) fliter and pan gasket
fan relays for the fan to work, and also so i can purchase the dual fan w/out a problem
iac relocator to fit my turbo inlet pipe a little better
fix exhaust hanger

parts waiting to be installed;
new rpm gauge coltbolt
alky injection
3"dp with 40mm tial gate
and f.a.s.t. bank2bank
gunna have a refab of my up pipe; planning on relocating the BOV to get as close to the outlet of the intercooler (begining of the up pipe) so it doesn't effect the alky. The alky nossle will be installed as close to the TB butterflies as possible, ANY THOUGHTS on this?

 

[TURBOELKY]

cool

good luck, i've only heard good things about the f.a.s.t. must be nice

 

[nordy racer]

your going to have a nice BEAST once everything gets installed

 

[XxDarkSidexX]

your going to have a nice BEAST once everything gets installed

i hoping for more of a tame dragon aura :biggrin: But if it ends up being a raw beast, thats cool too

I still need to buy oil and transmission pan gaskets and fluids and filters. The gaskets will be cork'ed, havn't decided on what filters yet, but the oil will be Valvoline Syn. Power and the transmission fluid will be a mix of Dexron 3 and TrickShift. Then some new BFG D/Rs for tires, prolly gunna go 275/60/15 if they'll fit. But I might have to add an adapter, which is no big deal but figuring out what size is what im worried about heh. Well once those parts are in, it shall being. Sounds good? Just ordered some little parts i needed today;

ARP Main Stud Kit
new shifter cable
new vacume block
a VB and turbooil line gasket


thought id share cus im bord waiting for UFC to start.

 

[XxDarkSidexX]

your going to have a nice BEAST once everything gets installed

i hoping for more of a tame black dragon aura :biggrin: But if it ends up being a raw beast, thats cool too

I still need to buy oil and transmission pan gaskets and fluids and filters. The gaskets will be cork'ed, havn't decided on what filters yet, but the oil will be Valvoline Syn. Power and the transmission fluid will be a mix of Dexron 3 and TrickShift. Then some new BFG D/Rs for tires, prolly gunna go 275/60/15 if they'll fit. But I might have to add an adapter, which is no big deal but figuring out what size is what im worried about heh. Well once those parts are in, it shall being. Sounds good? Just ordered some little parts i needed today;

ARP Main Stud Kit
new shifter cable
new vacume block
a VB and turbooil line gasket


thought id share cus im bord waiting for UFC to start.

 

[TURBOELKY]

where

are your airdams?? have you bought some for the car yet? looks naked without..but the rest looks good.

 

[XxDarkSidexX]

im making my own :biggrin: my stockers are going in the forsale basket. After the rebuild im going have some sweet parts for sale. Make back some money hopefully and get a turbo but well see! That usedparts section t67 for 700 sure looks tempting.