New "Stance/Performance"

[jlat]

Not much! TE-44, 55lb inj, Alky control, 208-208 cam, Ported heads, F/M- I/C, Pro-torque 2800 NLU converter, JE Pistons, Corillo rods (some sort of H-beam rods), ATR 3" SS dual exhaust.

hello; How about a down pipe, MAF,intake setup. I just have to know.
With these cars it just seems to be all add on stuff and to get it all to blend is the deal. I've been adding stuff for a while and I have an idea for more.
IBBY

 

[scot w.]

hello; How about a down pipe, MAF,intake setup. I just have to know.
With these cars it just seems to be all add on stuff and to get it all to blend is the deal. I've been adding stuff for a while and I have an idea for more.
IBBY

Yes, 3" downpipe, stock MAF, Cold air intake by GNS....

 

[jlat]

hello people; Scoot W. GNS has a cold air kit? It must be a one off as it's not on your product list unless I missed it.
IBBY

 

[scot w.]

hello people; Scoot W. GNS has a cold air kit? It must be a one off as it's not on your product list unless I missed it.
IBBY

Yep it's a one off kit we made but never got around to making them up.. Still haven't

found someone to re-make the inlet pipe for us at a decent cost.



Scoot.

 

[jlat]

Yep it's a one off kit we made but never got around to making them up.. Still haven't

found someone to re-make the inlet pipe for us at a decent cost.



Scoot.

hello; Too bad I'am in the market for something and it's probably a nice one. Why not show a pc. of it and if there's enough interest you could do a few.
IBBY

 

[Quiky One]

Scot, shoot me pm with an update.

 

[scot w.]

Scot, shoot me pm with an update.

PM sent..



SW

 

[jlat]

hello people; Alright Scott W. are you thinking about showing your intake? If not it's alright. But have you thought about contacting BWR I thought they had cum up with a good supplier for tubing. Maybe I was just dreaming.
IBBY

 

[scot w.]

hello people; Alright Scott W. are you thinking about showing your intake? If not it's alright. But have you thought about contacting BWR I thought they had cum up with a good supplier for tubing. Maybe I was just dreaming.
IBBY

Like I said earlier, I haven't found a company with reasonable costs yet do remake the inlet pipe that is needed, then people want different sizes to fit diffetent MAF's and so on, and so on so I just decided to can the idea and let the others sell theirs. Too much else going on right now from Gauge clusters to Headlight covers that will withstand 180mph passes!


Sorry,

Scot W.