Newbie question concerning the smaller 009 injectors.

[Eric Stage I]

01D030B is the newer part# for the 42lb "009's", so its the same injector.

 

[TexasT]

Can you tell by the chip writing if this is a good "burn" for a stockish car with those injectors?

Posted from the TurboBuick.Com mobile app

 

[Eric Stage I]

That chip was made for a te44/60 turbo and stock heads/cam. It would be a bit rich at WOT with a stock turbo. Other than that it should work fine.
Eric

 

[asto-t]

Will a 01d105b work with stock chip?

 

[Eric Stage I]

Will a 01d105b work with stock chip?

I "think" those are 30lb disc style injectors. Many people have used those with the stock chip, but sometimes there can be small issues with BLM's and tip-in stumbles.

 

[TexasT]

That chip was made for a te44/60 turbo and stock heads/cam. It would be a bit rich at WOT with a stock turbo. Other than that it should work fine.
Eric

Thanks, that is good to know. I have a ta60 and a ta62 to try out. Gotta get the trans back into it first. These cold days (i know it isn't that cold) get warned up I will give it a whirl.

Posted from the TurboBuick.Com mobile app

 

[asto-t]

I "think" those are 30lb disc style injectors. Many people have used those with the stock chip, but sometimes there can be small issues with BLM's and tip-in stumbles.

Ok Thanks for the Info!