You can type here any text you want

NIB K1 Technologies Buick V6 6" H-beam Rods, Used Buick 4.1 J&E Used Forged Turbo Pistons, Misc

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

Ken Adams

Member
Joined
Dec 31, 2007
Messages
324
NIB K1 Technologies Buick V6 6.000" bushed h-beam connecting rods, part # BH6000ARLB6-A, for use with the narrow journal Buick style crank. Asking price $490 shipped to lower 48 states.. These Rods Are Not Compatible With Below JE Pistons When using a 3.400" stroke SOLD

Used Buick 4.1 (252) J&E forged turbo pistons with .927" pins and rings installed. Compression height 1.757", piston size 3.9949", cylinder bore size 4.0019", dish volume 26.1. Very good condition. Asking price $350 shipped to lower 48 states.. These Pistons Not Compatible With Above K1 Rods and A 3.400" stroke

NIB Caspers Electronics fan relay installation kit for the 84/85 GN. Per Caspers Electronics" Kit allows use of an electric fan on 84/85 hot air cars which originally used the mechanical belt driven fan. When using an 87 style ECM, fan control can be programmed in the PROM chip. This kit can only be used if you upgrade your ECM to the 86-87 unit." Casper item #102066. Casper price $72.95+shipping. My asking price is $55+shipping.

SAVE ! I will be attending the GS Nationals and can bring above items with me. Those seriously interested about purchasing, PM me. Prices will be reduced since no shipping will be involved. NO tire kickers please
 
What type of compression ratio were you getting with those pistons? Were they used in a turbo buick?
 
I never got around to using these pistons. I got a good buy on a new stroker kit and decided to go that route instead.The party I purchased these turbo pistons from was getting a compression ratio of 8.057 : 1 with a head chamber of 47cc.
 
I never got around to using these pistons. I got a good buy on a new stroker kit and decided to go that route instead.The party I purchased these turbo pistons from was getting a compression ratio of 8.057 : 1 with a head chamber of 47cc.
with what crank and size rods?
 
3.400" stroke crank and 6.000" c to c connecting rods

Input from members of this site would suggest the compression height of 1.757" and 6.00" rods would require a stroke of 3.55", not the 3.400" I had previously indicated.
 
[quote="NIB Caspers Electronics fan relay installation kit for the 84/85 GN. Per Caspers Electronics" Kit allows use of an electric fan on 84/85 hot air cars which originally used the mechanical belt driven fan. When using an 87 style ECM, fan control can be programmed in the PROM chip. This kit can only be used if you upgrade your ECM to the 86-87 unit." Casper item #102066. Casper price $72.95+shipping. My asking price is $55+shipping.[/quote]


I'll take the fan wiring kit. Payment info, please.
 
[quote="NIB Caspers Electronics fan relay installation kit for the 84/85 GN. Per Caspers Electronics" Kit allows use of an electric fan on 84/85 hot air cars which originally used the mechanical belt driven fan. When using an 87 style ECM, fan control can be programmed in the PROM chip. This kit can only be used if you upgrade your ECM to the 86-87 unit." Casper item #102066. Casper price $72.95+shipping. My asking price is $55+shipping.


I'll take the fan wiring kit. Payment info, please.[/quote]
Shipped USPS ok?
 
Shipped USPS ok?

Sure zip 30294. Let me know.[/quote]

USPS Priority Mail is $6.30. If you want a tracking number that will be an additional $0.75.
I prefer a Postal MO for payment . Send payment to: Ken Adams, 1913 Brookgreen Drive, Jefferson City, MO. 65101
Thank you
 
Sure zip 30294. Let me know.

USPS Priority Mail is $6.30. If you want a tracking number that will be an additional $0.75.
I prefer a Postal MO for payment . Send payment to: Ken Adams, 1913 Brookgreen Drive, Jefferson City, MO. 65101
Thank you[/quote]

Sorry but postal money order or any money order for that matter is a no go as I am currently in Afghanistan. But I can have my bank send you a check via bill pay system otherwise we can cancel the deal. It's up to you. Let me know.

Pete
 
USPS Priority Mail is $6.30. If you want a tracking number that will be an additional $0.75.
I prefer a Postal MO for payment . Send payment to: Ken Adams, 1913 Brookgreen Drive, Jefferson City, MO. 65101
Thank you

Sorry but postal money order or any money order for that matter is a no go as I am currently in Afghanistan. But I can have my bank send you a check via bill pay system otherwise we can cancel the deal. It's up to you. Let me know.

Pete[/quote]

Let's cancel the deal
 
Back
Top