Nice pair of heads and titanium retainers

[slimtastic]

ok i got a fresh set of iron heads that i recently got back from S.A.M. here in houston. they were completely cleaned up and machined. ready to drop on and kick some butt

-solvent bath washed/cleaned
-Ferrea 6000 series valves 1.77 intake 1.5 exhaust
-fresh 3 angle valve job
-light cleanup work done in bowl area and intake port entrance to match standard felpro gasket (not 1200)
-lightly resurfaced to true up head surface .010 which puts the cc's to about 44cc
-Stock spring seats machined for hardened springs shims.
-Brand new Comp 980 springs installed and properly shimmed. max lift on springs is .530
-brand new Viton valve seals

400$ plus shipping


i also have a set of titanium valve spring retainers from comp.

80$ to your door

 

[slimtastic]

TTT

 

[turbo6randy]

Do you have a part number for the retainers? Are they for stock replacement?

 

[slimtastic]

they are for stock replacment diameter springs...i ran double roller valvesprings on them
i dont see any part number on them, my machinist whom built a set of heads for me "upsold" me on them and said they were comp titanium retainers.

 

[slimtastic]

OBO i need to get rid of this stuff

 

[esm]

pm sent

 

[slimtastic]

ttt

 

[leirch]

ttt

PM sent