No data!

[Travon]

The harness plugs directly in. From looking at the numbers(1227148) it seems to be correct. The chip is not stock, its a old kenne bell (9006). I spoke to eric and he said it shouldn't matter.

 

[Eric Stage I]

I'm sending another Scanmaster today. Let's see how that does.

 

[TurboBob]

I think his scanmaster is ok.

B

 

[Travon]

 

[Travon]

 

[TurboDave]

Lol! Sorry bout that! Yes it has continuity!

If you measured continuity, what does 3.78-4 signify?

 

[Travon]

I had the meter on the wrong settings at first.

 

[TurboBuRick]

Wires look good at the ecm. No sign of tampering.

Do you have access to another ecm?

 

[Travon]

Yeah! I took a long look at all the wiring between the ecm and the aldl and they all look good. I admit im not a pro when it comes to wiring, but this was suppose to be a simple install. 3 wires!!! Another ecm would be nice but there's not alot of members on my end. Hopefully its the sm and not the ecm.

 

[TurboBuRick]

It is simple. Very cut and dry. This does not happen very often.

The test you did (tapping white wire to ground) pretty much rules out a bad scanmaster.

How did you tie onto the orange wire? Butt connector? Wire nut? Twisted then black taped?

 

[Travon]

At first I used a male connector to stick in the front of the aldl, and when that didnt work i spliced into the orange wire just behind the aldl and tried it that way. Then proceeded to the ecm.

 

[turboc87gn]

It is simple. Very cut and dry. This does not happen very often.

The test you did (tapping white wire to ground) pretty much rules out a bad scanmaster.

How did you tie onto the orange wire? Butt connector? Wire nut? Twisted then black taped?

It dosent take much of a connection to make it work..I just hooked mine up yesterday and im still tryin to learn what everything means but i stuck the (tiny) wire in the port the first time just to see it work and it worked great i now have a u butt connector that i chopped in half stuck in the port and it works fine...

 

[Travon]

Yeah I wish mines was that easy!