o-ringed

[stagemonster]

hi i have a s2 off center 0016 and it has the deck o ringed at cylinder 1,5,2,6 not 3 or 4 was wondering whythat was done like that.

 

[stagemonster]

what head gaskets should i use any input would help

 

[Big Stu]

what head gaskets should i use any input would help

Sorry, I don't know the answer to your first question, but I think the cometics are a great choice for head gaskets.

 

[BAGN]

what head gaskets should i use any input would help

Are you gonna leave the o'rings in the block? Is so, Add o'rings to 3 &4 And use Copper Head gaskets. If your gonna remove them, Cometics would be good or you can cut a reciever groove in the head & run 1007's. I've always had great success with those. Hope this helps.

 

[stagemonster]

so it would be ok to remove them and it wont effect how the gaskets seal?

 

[BAGN]

so it would be ok to remove them and it wont effect how the gaskets seal?

You would need to deck the block after removing the o'rings.

 

[stagemonster]

will my stock gn intake and gn1 heads still work once the block has been decked

 

[stagemonster]

that seems like a lot of material to take off of the deck